Greg's One Stop Automotive Service Shop

Busy weekend. Currently back logged until the beginning of October. Although, I still have a chance to squeeze in some occasional quick work or emergency repairs. Don't hesitate to message, call, or text.

3 inspections and estimates provided for scheduled repairs.

2007 Chevy Tahoe
Customer concern of heavy vibration during acceleration and highway speeds. Caught the bad rear u-joint just in time.

2014 Infiniti QX80
Customer is planning a high milage trip. Upon full vehicle inspection found some loose suspension parts. Relaced front upper and lower ball joints on both sides.

2007 Chevy corvette (unpictured)
Diagnose squeal from serpentine belt area. Install idler pulley.

2018 Jeep Cherokee

Active grill shutter replacement

2013 Chevrolet Captiva
2.4l
Common problem: rear main seal failure due to crank case vent clogged by carbon build up.

You can see on the intake there is a small round hole open in 1 picture and stuffed full of carbon on the other. An engineering failure in my opinion. That small hole clogs with carbon creating pressure within the engine. Pressure will build up and find the easiest exit. Which on these is the rear main seal.
Removed front cradle, transmission, and replaced seal.