Nu Tech Software Solutions

The first prototypes of the new AlarmDecoder AD2IoT are looking good.

Key hardware features.

* ESP32-WROOM-32 - WiFi and bluetooth module with U.FL antenna.
* Ethernet 100Mb interface with IEEE 802.3 PoE support.
* 3000VDC galvanic insulation between the PoE Ethernet part and board's power.
* WiFi 802.11 b/g/n WEP, WPA / WPA2 PSK / Enterprise.
* High reliable industrial grade -40+85C components.
* MicroSD card for logging or general storage.
* LiPo battery charger with LiPo battery connector and battery level monitor circuitry.

The C++ open source firmware for the ESP32-WROOM-32 currently supports the following user configurable notifications.

* Phone call and SMS messages using Twilio component.
* Email notifications using SendGrid.
* Smartthings IOS and Android app for secure management and control.
* Ser2sock server.

Use coupon code 2020WTF through the end of the year to get 20% off orders over $80 at www.Alarmdecoder.com

We are down to the last few hundred AD2Pi first generation boards that will ever be made 😥. Many thousands found homes and we hope this next generation board will find even more happy homes.

Starting sometime in the first quarter of 2019 we will begin shipping the new AD2Pi-pHat. With our continued support for the Pi 3b+ and Pi Zero platforms we will now be adding an optional AD2-Pi-Hat Pin adapter to allow for a variety of popular IoT development environments to connect to the new AD2Pi-pHat.

Let us know what development board you want to see support for.

The new laser cut aluminum case for the AlarmDecoder Raspberry Pi Bundle will arrive from a local company any day now! They will start shipping next week. This update was a little more R&D than expected so the price will likely go up by $5 for the next few months on the bundle. The design was adjusted a little to provide a punch out area so when we move to the new Pi board later this year it will be ready to hold it.

We recently updated the SmartThings integration to UPNPPush notifications for faster updates and more features. Contact ID reporting and relay OPEN/CLOSE events are now being sent to the SmartThings AlarmDecoder service and soon we will allow for even more virtual switches that can be associated with a contact id report code or relay. In the near future Virtual relays and Expanders will allow more integration so any SmartThings switch can act as an alarm zones*.

https://github.com/nutechsoftware
https://www.alarmdecoder.com/wiki/index.php/Raspberry_Pi

* currently Ademco Vista only. Virtual expander and relay support for DSC is on the road map for late 2018.