Kizlon

Diaper trolley KDT-A100 :
Diaper trolley is uniquely designed to serve hygiene and comfort in nursing and maternity wards. The KDT-A1 series model is available in two different diaper holding capacities serving the purpose to ease the workload of the mothers.Following are the two models-

Specifications:
Absorbing capacity of paper diaper(approx.):

35 pcs

Frame of clean diaper:

2 Levels

Capacity of waste bin:

50L (1 piece)

Possible number(approx.):

15 persons

Absorbing capacity of cloth diaper(approx.):

40 pcs

Material:

Steel

Coating of main body:

Powder baking varnish

Features:
The diaper exchanging baby trolley is divided into three major components: Waste zone, Drawer and Clean zone.
• Waste zone: According to the absorbing capacity of different diaper holding bins, the waste zones have one or two dirty diaper bins. For easy access, cover can be pulled up and used diaper can be thrown away.
• Drawer: It can collect all small and important items or instruments needed for nursing.
• Clean zone: with no access to used diaper zone, clean diaper can be stored in hygienic place and no cross contamination can take place.

Applications:
They are basically found in nursing and maternity wards. Since it is in trolley form, it is easy to move and carry anywhere. The storage compartments are huge and user friendly. The clean and the used diapers are in separate places so that the foul smell does not run over.

Blood gas analyser KHA-A104 :
KHA-A104 model is a blood gas analyser which aspirate blood sample from the syringe and measures pH and partial oxygen and carbon dioxide. The results are quick and easy to interpret.

Specifications:
Display:

8.4” TFT LCD screen

Data storage capacity:

More than 5000

Whole blood mode:

50µL

Relative humidity:

≤85%

Environment temperature:

15 ̴ 30°C

Internal programming:

RS232

Features:
• Usage: With modern design and compact nature, it is a durable and space saving device and cost effective. It has fully automatic calibration with user friendly interface
• Software design: It comes in all the updated software needed, with a built-in 8.4” LCD screen. It has interface RS232 and bar code reader. It can save more than 5000 numbers of data
• Tests: It measure blood gas level and also oxygen saturation in blood

Applications:
The blood gas analyser detects all the possible parameters through the programmed tests. The analyser also helps to detect blood gas level and oxygen saturation level in blood.

Otoscope KOE-A100 :
Kizlon Otoscope KOE-A100 is a hand held digital medical device used for examining ear and ear drums.

Specifications:
X-ray tube:

Fixed anode Max. height: ≤1750mm Min. height: ≥500 mm Rotate around horizontal axis: 180⁰ Rotate around vertical axis: ±90⁰

Tube voltage:

40-90kV 9 steps

Tube current:

50-90kV 15mA 50-90kV 30mA 40-80kV 50mA

Power supply:

Voltage: 220V±10%, 50Hz Inner resistance: ≤1.0Ω

Power output:

3.0kW

Photography time:

50-90kV 15mA 0.1-6.3s 50-90kV 30mA 0.1-6.3s 40-80kV 50mA 0.1-1.5s

Features:
• The instrument has a compact design and is convenient to operate
• It has a high pressure-resistant electrical tube with enough voltage and current, hence the definition and contrast of the machine are good
• It has a combined X-ray generator which allows the tube and rocker to move up and down freely and hence photograph can be taken in wider range of direction
• X-ray generator is matched with protective stereotype inside and the feature of 10m wireless remote controlled exposure leads to less harm to patients and doctors
• The current has 3 three gears and different current can be chosen according to requirements of photography, there by widening the range of the instrument
• Telescopic vertical rotating angle is larger than 60?
• Features of anti-electric shock, anti-scattering and full wave rectifier
• It has protection against over-voltage, over-current and output overload

Applications:
This machine is used in radiology, orthopedics, wards, emergency rooms and ICU.

Anaesthesia Ventilator Machine KMV-A100 :
It is equipped with a built-in ventilator and 4 tube flowmeter, this machine has a pneumatic driven electronically controlled system.

Specifications:
Monitor:

LED screen

Drive:

Electrically controlled, Pneumatically driven

Gas source:

O2, N2O

Modes of ventilation:

A/C,IPPV, SIPPV, MANUAL

Tidal volume:

0~1500ml

I:E ratio:

1:1.5; 1:2.0;1:2.5; 1:3

Vaporizer:

Enflurane, Isoflurane and Sevoflurane

Safety valve:

21%

O2 flush:

25~75L/min

Respiratory rate:

4~40bpm

Controlled ventilation and assisted ventilation switching time:

6secs

Maximum limiting pressure:

≤12.5kPa

Maximum operating pressure range that can be set (pressure limit range):

0~6.0kPa

Oxygen alarm:

When the oxygen supply from pipe or cylinders is lower than 0.2MPa

Ventilation volume alarm:

Lower: 0~12L/min Upper: 18L/min

Power alarm:

When AC and DC power supply fails, keeps on snoozing >120s

Working temperature:

10~40⁰C

Working relative humidity:

No greater than 80%

Working atmospheric pressure:

860~1060hPa

Storage temperature:

-15⁰~+50⁰C

Storage relative humidity:

No higher than 95%

Storage atmospheric pressure:

86kPa~106kPa

Power requirement:

AC 100~120V/50~60Hz

Features:
• The anaesthesia machine has an LED display screen
• It has 1 patient circuit for adults
• Enflurane/Isoflurane/Sevoflurane are used as vaporizers
• It has three working modes of Closed/Semi-closed/Semi-open
• The trolley of the machine is fitted with 4 anti-static rubber castors; two of which are lockable for braking and easy maneuverability with foot operated brake provisions and one totally extractable drawer
• It should be stored in a room which is well ventilated and is without corrosive gases

Applications:
The anaesthesia machine provides oxygen and anaesthetic agent to a patient needing to go through an operation and perform ventilation management.