Strong Speed Works

Local guy claims to fix tunes.
Continues to put out his own garbage. 🥴🥴🥴
There’s a reason you’ve changed your name multiple times. ❤️
Hell yea dude. Keep it going. Just change your name again and move shops lol. 🤙🏻🤙🏻

08 LS3 Corvette Procharged
3 bar map
DW1000cc injectors
E85
Bolt ons

What’s wrong with the tune?
Oh let me explain.

•First and foremost, the injector data is completely wrong. You cannot just enter what size they are and call it good. Deatschwerks has their injector data publicly available. All you have to do is copy and paste.

•E38 pcm only reads to 63.5lb injectors. To get around that, you need to scale some stuff. So at the moment, It’s not scaled properly.

•Stock VVE tables even though it’s 3 bar? Why swap to a 3 bar map if you’re not even gonna adjust anything?

•VVE is 60+% rich at idle. I didn’t get past that.

•Forced to “MAF only” but fails to realize the VVE still needs to be adjusted. The PCM still references the VVE regardless of what the dynamic airflow is.

•LTFT is turned off.

•Why is the start up airflow at 30g/s? lol. I’ve NEVER had a cammed LS3 require that much air for startup airflow.

•Why is the idle at 850 across the board?

•Timing is too hot for pump gas. Probably detonates it’s ass off.

•Appears they just interpolated the timing table down so it’s nice and flat. Hell yea.

•Knock sensors are desensitized. It was probably pinging and they just did that lol.

•Torque management is off on the 6l80. Let’s break s**t. Hell yea.

•Shift Inertia Factor looks like it’s copied from a truck?
It’s worse than the car setup. Why do that?

•Torque converter lock up sequence is stock. So it’ll lug down in 3rd and 4th. Nice.

•Shift scheduling is stock. Awesome.

I run across this s**t all the time.
When shopping for a tuner, ask questions.
Ask if they’re going to put in the proper injector data. If they’re willing to tune your Chinese injectors, they’re just taking money from you. Period.
Ask if they’re gonna adjust the VE tables along with the MAF.
Ask if they’re going to adjust your transmission.

ANY as***le can buy a dyno and make some HP numbers. How does it drive though?

Must be national LSA week
Here’s another LSA swapped vehicle I’m tuning today.
This one is a remote tune.
57 BelAir LSA
BTR Stage 3 PDS cam
6l80
3200 stall 4.11 gear in a 9in
Gearing is a bit steep for a 6l80 lol.
It’ll just fry the tires 1-4
🤙🏻😎🇺🇸

In for a tune today
2020 Silverado
Whipple 3.0
Bagged
30’s
Custom everything.