Solid State Enclosures

F-350 SQ “mini” SQ project. Mini only because a DSP was not used, but can be added in future.
-PAC AP4 for integration
-Sky high 1/0 OFC for wiring
-Soundqubed 100.4 class d (2x) for mids and highs active amplification
-Focal flax evo’s for front 2-way and rear coaxial
-Focal flax 10” subs (4x) in custom made sealed box (0.53 cubic feet net/ sub) with seat lift
-Soundqubed Q1-2200.2 for sub amplification

Small but strong: 6.5” Digital Designs 506’s on a DD2500.1. In the back of a caddy .64 cubic feet per sub. Slow-mo vid in story to see them flex.

fabricated his own speaker pods with some DD audio voice optimized speakers (8” mid and B3 bullet tweeters). Keeping it plenty loud with the top off! Enclosures are covered in fiberglass resin to keep things water resistant.
Each component is running off of its own channel of a DD C4.75 with the mids bandpassed 50-3,000 hz. Tuned with the clipping indicator on the amp these things get very loud and clear with 0 distortion and PLENTY of headroom.

262 square inches of illuminated sub. Gotta love it. Digital Designs #9921 powertuned 21” subwoofer.

Another custom SSE enclosure beatin’ down the road! A shop in the Salt Lake area... with the initials SW... did not do this customer right. He came to me to free his subs from the “custom” box made by the aforementioned shop. Get it done right... the first time, lads! DM with inquiries.