Converted Furnishings

The process:
1. Sand entire piece at 120 grit to remove laquer.
2. Remove all hardware clean, wrap all drawers.
3. Roll two coats of primer 123 stain blocker.
4. Prime hardware
5. Two coats of preferred paint.
6. Two coats of paint on hardware front and back.
7. Two coats of polyurethane.
8. Spray hardware with finishing spray
9. Replace hardware.

Please wait 24 hours In between primers, paints and polys.

This was a really difficult piece but really fun. It needed a lot of work. The shelves were bowed so I needed to cut new shelves. That was really difficult because there were these 1"x1" cutouts to make it fit. And plus I'm not a carpenter. But we made it work! Next, it needed some veneer repaired and sanded smooth. Also the handles needed to be refreshed and one of the pulls needed to be filled with wood filler and sanded. Then it needed 4 coats of paint and primer and also 3 coats of accent gold. Then sprayed with sealant. Did I say this piece was a lot of work? Here are the results.

Just a simple sofa table redone. Best part is the pup head!

This piece took longer then expected. But I love the results . This piece was filthy, had to sand the sides and top. Replace the back and refresh the inside.