HV TECHNOLOGIES

𝐏𝐃 & 𝐑𝐈𝐕 𝐃𝐞𝐭𝐞𝐜𝐭𝐨𝐫𝐬: 𝐃𝐃𝐗 𝟗𝟏𝟔𝟎 & 𝐃𝐃𝐗 𝟗𝟏𝟔𝟏

These modular instruments support up to 4 simultaneous PD/RIV & voltage inputs, covering IEC 60270, NEMA, and CISPR standards.

⚡ DDX 9160 – Lightweight, portable & battery-operated for on-site PD testing and transformer measurements.
🧪 DDX 9161 – Lab-optimized with a low-noise AC supply for enhanced sensitivity.

Both units integrate with Haefely’s powerful CaMS software, offering multi-channel control, advanced analysis tools (PRPD, data logging, fingerprinting), dark mode, and PDF reporting – all with safety-enhancing fiber-optic isolation.

𝑭𝒆𝒂𝒕𝒖𝒓𝒆𝒔
✅ AC and DC measuring modes
✅ User-defined measuring band
✅ Modular design, 1 to 4 channels, ability to daisy chain many detectors
✅ Simultaneous RIV and PD reading
✅ Phase Resolved PD (PRPD) patterns for fingerprinting
✅ High-resolution spectrum analyzer with oscilloscope
✅ Data acquisition and test report generation
✅ Optically decoupled from the computer
✅ Unit can be easily upgraded (up to 12 simultaneous PD/RIV readings)
✅ PD interpretation – The phase-resolved analysis and recording capabilities allow for future data analysis.
✅ Save space by utilizing an internally integrated measuring impedance
✅Combine with the AKV 9360 measuring impedance and 9231 Series (AC) or 9241 Series (AC & DC) coupling capacitors (all components can be housed in the base of the divider)

Contact us for more information: https://www.hvtechnologies.com/contact-us/

𝗥𝗙 𝗖𝗼𝗻𝗱𝘂𝗰𝘁𝗲𝗱 𝗜𝗺𝗺𝘂𝗻𝗶𝘁𝘆 𝗧𝗲𝘀𝘁 𝗦𝘆𝘀𝘁𝗲𝗺

The primary goal of an RF conducted immunity test is to determine how well a device can withstand RF interference conducted through its power and signal lines without malfunctioning or experiencing performance degradation. This is critical for compliance with various industry standards (e.g., IEC 61000-4-6, ISO 11452-4, MIL-STD-461) that specify the levels of RF immunity required for different types of electronic equipment.

𝑨𝒑𝒑𝒍𝒊𝒄𝒂𝒕𝒊𝒐𝒏𝒔:
✅Consumer Electronics: Ensuring that household devices like TVs, radios, and appliances are not adversely affected by RF interference.
✅Automotive Industry: Testing vehicle electronics to ensure they function properly despite the RF noise present in automotive environments.
✅Military and Aerospace: Ensuring the reliability of electronic systems in environments with high levels of RF interference.
✅Industrial Equipment: Verifying that machinery and control systems in industrial settings are immune to RF noise.

The 𝑪𝑰𝑻-𝟏𝟎𝟎 is a comprehensive RF-immunity test system, compliant with standards like IEC 61000-4-6 and MIL-STD-461 CS114, featuring an internal signal generator, RF power amplifier, and three RF power meters for automated testing from 4 kHz to 1.2 GHz. It is user-friendly with an excellent cost-performance ratio and offers optional add-ons such as coupling/decoupling devices, EM clamps, and bulk current injection probes.
👉🏼Download the CIT-100 datasheet:https://hvtechnologies.com/wp-content/uploads/2022/02/CIT-100-datasheet.pdf

The 𝑪𝑰𝑻-𝟏𝟎𝟎𝟎 is an advanced version of the CIT-100, offering an extended frequency range up to 1200 MHz and stand-alone operation via an integrated touch-screen PC. It features an integrated directional coupler and power meter for forward and reverse power measurement, with all instruments (signal generator, RF power amplifier, and 3-channel RF power meter) usable independently, suitable for both conducted and radiated immunity tests according to IEC 61000-4-3 and can connect to an additional external RF power amplifier.
👉🏼Download the CIT-1000 datasheet:https://hvtechnologies.com/wp-content/uploads/2022/02/CIT-1000.pdf