Argos Ordnance

Bren Il barrel that was sent in for a cut, crown and thread for an SBR project. A large online shop turned this customer down due to the barrel assembly being non-standard and unable to be dropped into their machine.

Bob’s your uncle. Hammer bob on this Charter Arms snubby and a little touch up to match the original case hardening.

Using the Viper Benchrest 3-in-1 tool to indicate and thread a ****ms Buckmark barrel 1/2x28RH for suppressor use. These jigs are handy for indicating and blueprinting rifle actions, bolts, short or odd barrels and more. viperbenchrest

Well then. Here is an example of a kitchen table gunsmith’s attempted pin and weld work that a customer wanted removed to install a new 16” barrel. I have corrected bad work from this individual on other occasions unfortunately. Happens more often than not, and confirms my lack of faith in the folks that are working on customer fi****ms these days in a professional setting.