Loaded Chamber

This MAC 9DS had some slide machine work and barrel porting done. An additional serration and window were machined forward of the factory machined cuts. The barrel was ported in each cut centered in the windows and at a 25 degree angle. The barrel is coated on Gold Cerakote and the slide is a simple Black Multicam. The grip module and mainspring housing were reduced for better grip. The grip safety was pinned in place at the mainspring housing. Then the grip was stippled in wagon wheel texture.

The rear end folding trunnion conversion on this 5.45 Saiga was done by another shop. They had left deep grind marks in the receiver that were really noticeable after the finish was applied. The rear trunnion was demilled and the grind marks cleaned up then rear trunnion was re riveted. The front end had a pin and welded combo block and faux 4 piece flash hider barrel extension pin and welded done by the previous shop. The client got a new combo block and form one’d the rifle. New combo block was installed and pinned. The old selector marks were removed and the Russian marks laser engraved and selector notches were cut. Lastly all metal was coated in Russian paint.