Sakura Garage

This clean S15 came into Sakura Garage with a serious problem — it was running, but spraying oil out of the exhaust and in desperate need of attention.

Rather than patching the issue, we gave it the treatment it deserved with a complete fully forged engine build from the ground up. Now it starts, idles, and drives exactly how it should, with a rock-solid foundation that’s ready to handle whatever boost gets thrown at it in the future.

The vision for this car was heavily inspired by the legendary Yashio Factory style, blending iconic Japanese tuning culture with a fresh, reliable setup built to be enjoyed for years to come.

Nothing beats bringing a car back from the brink and turning it into something better than ever.

Built by Sakura Garage 🌸

The G5 Voodoo Pro has been updated, now built on the G5 Voodoo Neo architecture, it combines the top-tier capability of the original G5 Voodoo Pro with key advancements from the G5 Voodoo Neo ECUs.
The new G5 Voodoo Pro continues to support up to 12 cylinders with sequential injection and direct spark, or up to 8 cylinders with staged sequential injection and direct spark. It still has Direct Injection (DI) control* for up to 12 cylinders, along with dual e-throttle, dual wideband, GPS and Wi-Fi capability.

New hardware enhancements include a faster communications module similar to the Neo platform, delivering Ethernet connectivity, enhanced Wi-Fi, dual-purpose ADIO pins, 1GB of onboard datalogging, and more.

* DI requires an external OEM or aftermarket driver box like Link's DI Driver-4.

Highlights for the updated G5 Voodoo include:
An all new communications module: with faster USB speeds (download logs in mere seconds), GPS, Ethernet, and enhanced Wi-Fi.
Highly customisable IO, now using eight ADIO pins.
A cost-effective solution to proven Direct Injection control.
Dual on-board H-Bridges that support things like E-Throttle and low power E-Wastegates.
Dual onboard LSU 4.9 digital wideband controllers.
1GB onboard of logging memory, double that of G4X or the original G5 Voodoo Pro.
Ethernet with daisy chain support.
New WEIPU CAN 1 connector supplies power for CAN devices, massively simplifying CAN wiring and accessory installation.
You can now power the ECU via the USB cable, just like the Neo or Razor PDM, making setting up the initial tune a breeze at your PC.
All four An Temp pull-ups can be disabled now, allowing all An Temps to be used as regular An Volt inputs.
Same A, B & E Superseal headers and pinout as the original G5 Voodoo Pro. A & B headers are closely matched pinouts with the G4X and G5 Voodoo Neo platforms.
All G4X and G5 tunes are compatible with the updated G5 Voodoo Pro (Migration Guide coming soon).
CNC Case, Sealed enclosure.

https://sakuragarage.net/products/g5-voodoo-pro