B.A.E. Operations, L.L.C.

This is some test data that we received from a customer from his 2001 5.9. He is very heavily involved in Pull Truck business and ran this test on his own modified street driven truck. These test were preformed from idle with no pre-boost. The testing was done to demonstrate the effectiveness of the headers over the stock Dodge manifold, Also note the reduction on the EGT's when real power was made.

Video of our 4BT manifold.

Front gear ISBe3.9 (ISB170) Engine is a ISBe3.9 also known as a ISB170 with a CM800 ECM. Crank is from a 4BT, using all the gears and gear case from a Dodge 6.7. also using 12 valve rod...

Our new prototype cast aluminum intake manifolds for the 7.3. Stronger, better airflow and solves the blown off intake tube.