Chiltrix Inc.

NEW! DHW80 Indirect Hot Water Tank // This is the highest-spec hot water tank on the market, it's made from Duplex 2205 stainless steel, with corrosion resistance 6x better than 304L stainless and 4x better than 316L stainless. The DHW80 holds net 70 gallons and is compatible with the Chiltrix automated anti-legionella function. See it here: https://www.chiltrix.com/heat-exchanger-tanks/

This Chiltrix designed and produced tank is made in our same factory where we make our buffer tanks and is designed to work with solar thermal, boilers, or of course with the Chiltrix ultra-efficient air to water heat pump which can make domestic hot water in addition to its record-setting cooling and heating functions.

Some impressive specs include a GIGANTIC 1.25" x 72' convoluted coil (also made from 2205 stainless) with over 32 ft^2 of surface area for fast heat transfer, with ports for backup element, anode, TPV, sensors, etc.

Chiltrix Lab Certified by the California Energy Commission

Under California Title 24, the CEC (California Energy Commission) requires that HVAC test labs be certified in order to provide official data. The Chiltrix test laboratory has obtained CEC certification and is now authorized to perform testing and provide certification according to the AHRI 550/590 test standard.

Psychrometric Controller With Dynamic Humidity Control

Chiltrix has officially released its new patent-pending Psychrologix™ controller. The new controller automates many chiller functions that are typically controlled manually, and in addition, includes the all-new DHC (Dynamic Humidity Control) function. The DHC function allows the chiller to perform “hyper-dehumidification” at times when humidity is high, by dropping the coil temperature to a point below the industry-standard coil temperature. When humidity has been corrected, dehumidification is reduced or stopped to save energy.

This is important because humidity is event driven, in other words, indoor humidity increase doesn’t simply happen by itself. For example, humidity occurs in an indoor space when someone takes a hot shower, or when an exterior door opening allows humid air to enter. Once the system has removed this humidity, dehumidification can be slowed or stopped by the DHC controller until the next humidity event occurs.

A regular air conditioner cannot control this, a standard A/C uses dehumidification energy regardless of whether or not dehumidification is needed. With Chiltrix Dynamic Humidity Control, energy needed for dehumidification is consumed only when dehumidification is needed. When dehumidification is not needed, the Chiltrix system efficiency can increase up to an additional 40-50% above its already-high AHRI 550/590 efficiency ratings. See white paper:http://www.chiltrix.com/documents/Chiltrix-Psychrologix-TS.pdf