Pick 2 Performance & Racing LLC

I have been getting the suspension and brakes dialed in on this C5Z. I installed Pfadt poly control arm bushings, QA1 coilovers and Wilwood Aero 6 brakes.

I searched the Internet for a Holley pro dash bench harness. I couldn't find one, so I made one myself for loading configurations before installing into the car. Also, I finished up today by doing some maintenance on a 2nd gen Viper.

I got a couple of videos edited from LS Fest East 2025. 3S Challenge and Autocross from NCM Motorsports Park.

A few photos from LS Fest east 2025. We ran both cars in the Grand Champion class which included 4 days of racing, including drag racing, 2 days of autocross and 3S challenge. Both cars ran all events without a hiccup! It was a blast and I am already looking forward to the next event!

I ran into a problem lately where a Holley Terminator X Max ECU lost its 5V reference which provides voltage for oil, fuel, map, and tps sensors. Luckily the car still ran, poorly though and I was able to chase it down to the ECU being the culprit. I installed a new ECU flashed in the old tune and the car fired right up. I have heard of failed ecu's but this is the first one I have seen.