Living Craft Design-Build

Have a look at our fresh air setup at Richmond Hill. Any ERV is going to give you continuous filtered air. The BRINK ERV from @475.supply gives us additional filtration with the PURE filter and additional heating and cooling with the G-6000 pre-conditioner. The G-6000 can call for demand from a thermostat, just like any other “zone” of the hydronic system for both heating and cooling. We can send 50 degree water to the G-6000, which acts almost like a radiator, cooling off the incoming air to help keep the space cool in summer. With only in floor hydronic cooling, it will be interesting to see how effective this approach is to take the edge off on a hot summer day.

Some passive house level detailing for your viewing pleasure

Preliminary blower door testing on the Conifer project was an overall success! The clients and the architect came out the jobsite today for our first air tightness testing. Our goal was 1 air change per hour at 50 pascals of pressure (ACH50). Our first test was around 0.5ACH50. After a little work by our extended team, we got things down to 0.4ACH50. It’s a promising start! If we put in more effort, we think we could probably get down to 0.3, but we are happy where we are at. We still have MEPs and another wall to could and insulate, so we will test again to ensure our air barrier integrity is in place. Thanks to for the thoughtful design and @475.supply for the air barrier consulting and products!
Shoutout to for leading the air sealing details onsite.

blower door