Labor Finders Albuquerque

Production Technician – Night Shift - 6pm to 6am -$10/hr.
Send resumes to [email protected]

The Production Technician is responsible to know the manufacturing processes and equipment on the line for the making of vacuum panels.

1. Adjust tack points to the proper tack settings
2. Fold panel flaps place; under tack holders press button; after cycle is complete remove panel and repeat
3. Place panels on pallet; complete and fill out proper pallet paper work
4. Keep area clean and free of tripping hazards
1. Check first panel after thru crosscut saw; to see if measurements are correct make hourly checks making sure that the cuts do not shift in size
2. Safely remove trim from boards after they are cut from the crosscut saw
3. Put trim in recycle container
4. Keep area clean and free of tripping hazards
1. Receive panels from envelope station fold flaps, put in machine install weight on panel after machine is full press start
2. When cycle is complete remove panel visually check for cosmetic defects
3. Save one panel each hour and do a leak test on it and record the findings if findings are not good contact the supervisor
4. Correctly fill out the paper work for the proper machine

Education and Experience:
High School Diploma or GED.
Previous night shift work experience.
Mandatory Requirements:
1. Must be able to lift 40 pounds with lifting assistance as requested
2. Must be able to stand for long periods of time

Skills:
1. Ability to learn, understand and follow directions.
2. Self-motivated
3. Communication
4. Teamwork
5. Problem solving
6. Decision making
7. Detail oriented
8. Ability with tools, materials and machine operations

Training Required:
On-site orientation and training will be provided
Comments:
Must have the ability to work overtime and shift work.