ProgTech

FLUX-OFF or PCB flux cleaner is a mild, but effective cleaner that easily removes the toughest deposits of flux, soldering oils and other contaminants such as grease, dirt and molding compounds. Flux remover is colorless and leaves no residue. It is used for gentle and intensive cleaning of printed circuit boards, electronic subassemblies and all other electronic components, suitable for degreasing of parts and equipment. It does not attack any material in common use. However, avoid using it on PVC and polystyrene.

If you would like to know more information about this product, please browse website @ https://www.progtech-store.com/en/home/103-flux-remover-spray-ecs-400ml.html
or contact 👝 [email protected]

Flux Remover and Cleaner Spray, ECS 400ml Solder flux cleaners and remover for PCB is an effective cleaner that easily removes the toughest deposits of flux, soldering oils, and other contaminants.

DP2T it's a brand new narrow size automated programming system, DP2T! It is convenient and cost-saving. It supports Tray, Tape & reel input and output peripherals.

Watch the Video:
https://www.youtube.com/watch?v=SuusrX4_Xes&feature=youtu.be

Contact ProgTech sales for more information!

DP2T Automated Programming System DP2T is the most convenient and cost-saving automated programming system. It supports Tray, Tape & reel. Contact with Dediprog sales for more information!

✨SPI Octal NOR/SPI NOR/SPI NAND Engineering Programmer✨

We are very excited to announce our NEW engineering programming model- SF700 for supporting both SPI NOR & SPI NAND is officially published today. 📝📝📝

Unlike SF100 & SF600, SF700 not only supports SPI NOR but SPI NAND as well. The most important is SF700 supports SPI Octal NOR to double programming speed than Quad. 💫💫💫

With same software interface as SF100 & SF600, SF700 is more to fulfill R&D’s demand. For more SPEC, please visit ProgTech website 📧

https://www.progtech-store.com/home/96-sf700-spi-norspi-nand-engineering-programmer.html

Or contact ProgTech directly by email or phone! Let's see how SF700 can continually support & fulfill your need‼️

SF700 SPI NOR/SPI NAND Engineering Programmer SF700 is an ALL new designed SPI Flash engineering programmer, which supports all SPI NOR Flash and SPI NAND Flash in the market.

NEW Product Release!!! UFS reading tools!!!🎉🎉🎉

Since February 2011, UFS first published into market, was designed to be the most advanced standard for both embedded and removable Flash memory-based storage in mobile devices. Nowadays, UFS already becomes a major type of memory device in mobile applications and computing systems which are requiring high performance and low power consumption.

ProgTech just release a series of professional UFS reader tools- UFSPro in this Month to fulfill market needs. UFSPro Series is a reading tool to read and write raw data in each LUN of UFS devices. It is with a powerful bridge controller IC, called DP7000, UFSProg series can support UFS v2.1 up to Gear 3 speed and USB3.1 Gen1 with UASP high-performance protocol; also, an open interface to connect with UFSPro, which users are able to use disk editor software to read or write the raw data in each LUN. 📝📝📝

UFSPro Series defines as 3 type model boards- UFSProg-PT✨, UFSProg-CS✨ & UFSProg-TS✨ with different type of BGA153 socket adapters- Open-top, clamshell, and adjustable clamshell. Details refer to Dediware official website- www.progtech-store.com. Or contact us by email- [email protected]. 📧📧📧