Aerower Eastern Europe

Benefits of 💪

Order your shoes 😉

📩 [email protected]
📞 +40 742 142 983

🦘 Compatibility with boots 🦘
HOPsej.cz, can show you all the possibilities without using words 💯👇
https://www.youtube.com/watch?v=UI-Lypa6K6M
So you can upgrade your old rebound boots with the components of the most advanced jumpers on the market! 🔄
As well as the technical advantages, there are others that are also unique in the sector!
✅ All Aerower components come with warranty,
✅ are manufactured in Europe
✅ and are tested piece by piece.
Find more information on http://aerower.com/tech

Pružiny Aerower do Kangoo Jumps | Kompatibilita a zaměnitelnost Do Kangoo Jumps můžete vložit pružiny z klokaních bot Aerower: https://www.hopsej.cz/c/hopsadla-a-balanc/klokani-boty/klokani-boty-aerowerZískáte tak možnost...

How do I know if my RS is well adapted? ✅
Here you have the best way to know:
Two fundamental factors are involved in customizing the RS:
weight and physical condition. ⚖🏋
1⃣⚖ Depending on your weight, you will need to configure the RS according to Aerower's strength customization chart: www.aerower.com/SCSC
2⃣ 🏋But what about the physical condition?
Each person jumps with different strength and power, and that can affect the setup of your RS.
📣 The easy and infallible test: the RS must be compressed at least halfway on most of your jumps.
What if this does not happen? 🤔
Then cut one or two more bands until you get this degree of compression. ✂
You can find the video on how to cut bands on our Youtube channel: https://www.youtube.com/watch?v=CwjHy_iFHjY
⚠ And remember!
It is always recommended that the RS tends to be soft rather than too hard. ✅ A hard RS might prevent you from enjoying all the benefits of the shock absortion in your jumps, it could even shorten the life of your arcs. ❌