ITALKRANES

he MTK 1006 can travel on the road without permits.

Maximum capacity of the MTK 1006 is 80 ton.

The superstructure is operated through the truck’s PTO and can be mounted on most of truck brands available on the market (IVECO, Volvo, SCANIA, MAN, Astra, Mercedes...).

Semi-round telescopic boom made of Weldox (Strenx) steel. Six independent sections are operated by one single hydraulic cylinder, booming out with partial load is possible.

Total boom height from ground 42.5 m. Total height with lattice extension (13m) 55,5 m.

Four radial outriggers hydraulically operated both from the cabin and the two sides of the carrier. The controls are independent one from another. Partial stabilization is possible.

The crane is supplied with a 50 ton hook block and a counterweight of 8 ton in two pieces.

The crane’s cabin includes comprehensive instrumentation and controls for the crane and the full motion of the vehicle on site.

Optional equipment:

auxiliary winch – folding lattice extension 7,1m – 13m in two pieces offset 0°-20°-40° - jib 1,3m – hook blocks of various capacities – pulling rear winch 12,5 ton – air conditioning – other options on request.

The crane is compliant with the 2006/42 CE directive and is provided with CE marking.

CONTACT ROMANIA:
+40.742.223002
[email protected]
CONTACT IRAQ:
Iraq +964.790.2392135 (VIBER)
[email protected]