Engr. Adnan Rasheed

https://youtu.be/LVM7G6ivyBY

Determine the factor of safety against yielding | Problem 10-89 | Mechanics of materials 10–89. The gas tank has an inner diameter of 1.50 m and a wall thickness of 25 mm. If it is made from A-36 steel and the tank is pressured to 5 MPa, Deter...

Problems about Failure theories, Mechanics of materials RC Hibbeler

10-90 | Determine required minimum wall thickness | Tresca criteria | Mechanics of Materials 10-90 The gas tank is made from A-36 steel and has an inner diameter of 1.50 m. If the tank is designed to withstand a pressure of 5 MPa, determine the requ...

https://youtu.be/z0DRoUWCgoI

Understanding Failure theories problems | Failure Theories | Engr. Adnan Rasheed Mechanical In this video you will be Understanding Failure theories problems or Failure Theories. Engr. Adnan Rasheed Mechanical10–75. The components of plane stess ...

https://youtu.be/stkUp9PZYNU

Draw the shear and moment diagrams for the beam | Ex 6.6 | Bending | Mechanics of Materials RC Hib Example 6.6 Draw the shear and moment diagrams for the beam shown in Fig. 6-12a. Dear Viewer You can find more videos in the link given below to learn moreTh...

https://youtu.be/-QS8i9nXrrQ

4.107 | Determine the maximum stress in post | Bending | Mechanics of Materials Beer and Johnston 4.107 The four forces shown are applied to a rigid plate supported by a solid steel post of radius a. Knowing that P 5 100 kN and a = 40 mm, determine the ma...