G+P Design Studio

🟦 𝐓𝐇𝐄 𝐁𝐋𝐔𝐄𝐏𝐑𝐈𝐍𝐓 𝐒𝐄𝐑𝐈𝐄𝐒
𝐀𝐫𝐜𝐡𝐢𝐭𝐞𝐜𝐭’𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭 • 𝐓𝐢𝐩 𝟐𝟗
𝐏𝐮𝐧𝐜𝐡𝐥𝐢𝐬𝐭𝐢𝐧𝐠: 𝐓𝐡𝐞 𝐅𝐢𝐧𝐚𝐥 𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐂𝐡𝐞𝐜𝐤
Punchlisting is where “almost done” becomes “move-in ready.” It ensures defects are corrected and details are finished properly before turnover.

✅ 𝟏. 𝐂𝐡𝐞𝐜𝐤 𝐟𝐢𝐧𝐢𝐬𝐡 𝐪𝐮𝐚𝐥𝐢𝐭𝐲
Paint, tiles, joints, edges, and alignments should be clean and consistent.

✅ 𝟐. 𝐓𝐞𝐬𝐭 𝐟𝐮𝐧𝐜𝐭𝐢𝐨𝐧𝐬
Doors, windows, locks, cabinets, and drawers should operate smoothly.

✅ 𝟑. 𝐕𝐞𝐫𝐢𝐟𝐲 𝐰𝐚𝐭𝐞𝐫𝐩𝐫𝐨𝐨𝐟𝐢𝐧𝐠 𝐚𝐧𝐝 𝐥𝐞𝐚𝐤𝐬
Bathrooms, balconies, and roofs should be checked to avoid future damage.

✅ 𝟒. 𝐂𝐡𝐞𝐜𝐤 𝐌𝐄𝐏 𝐟𝐢𝐱𝐭𝐮𝐫𝐞𝐬
Outlets, switches, lights, plumbing fixtures, and drainage should be tested.

✅ 𝟓. 𝐓𝐫𝐚𝐜𝐤 𝐜𝐥𝐨𝐬𝐞𝐨𝐮𝐭 𝐜𝐥𝐞𝐚𝐫𝐥𝐲
A written punchlist helps the team complete items faster and properly.

✨ 𝐃𝐞𝐬𝐢𝐠𝐧 𝐰𝐢𝐭𝐡 𝐩𝐮𝐫𝐩𝐨𝐬𝐞. 𝐁𝐮𝐢𝐥𝐝 𝐰𝐢𝐭𝐡 𝐜𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞.
Planning to build soon? Message us—our team can guide you from design to construction.
Stay tuned for Tip 𝟑𝟎 in The Blueprint Series:
𝐓𝐮𝐫𝐧𝐨𝐯𝐞𝐫 𝐚𝐧𝐝 𝐀𝐟𝐭𝐞𝐫𝐜𝐚𝐫𝐞: 𝐖𝐡𝐚𝐭 𝐭𝐨 𝐑𝐞𝐜𝐞𝐢𝐯𝐞 𝐚𝐧𝐝 𝐂𝐡𝐞𝐜𝐤.

🟦 𝐓𝐇𝐄 𝐁𝐋𝐔𝐄𝐏𝐑𝐈𝐍𝐓 𝐒𝐄𝐑𝐈𝐄𝐒
𝐀𝐫𝐜𝐡𝐢𝐭𝐞𝐜𝐭’𝐬 𝐈𝐧𝐬𝐢𝐠𝐡𝐭 • 𝐓𝐢𝐩 𝟐𝟔
𝐐𝐮𝐚𝐥𝐢𝐭𝐲 𝐂𝐨𝐧𝐭𝐫𝐨𝐥 𝐢𝐧 𝐅𝐨𝐮𝐧𝐝𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐒𝐭𝐫𝐮𝐜𝐭𝐮𝐫𝐞
Foundation and structure set the accuracy of everything that follows. If something is off here, it becomes visible in finishes—and harder to fix later.

✅ 𝟏. 𝐂𝐡𝐞𝐜𝐤 𝐝𝐢𝐦𝐞𝐧𝐬𝐢𝐨𝐧𝐬 𝐚𝐧𝐝 𝐥𝐞𝐯𝐞𝐥𝐬
Before pouring, verify layout, elevation, and alignment.

✅ 𝟐. 𝐕𝐞𝐫𝐢𝐟𝐲 𝐫𝐞𝐛𝐚𝐫 𝐩𝐥𝐚𝐜𝐞𝐦𝐞𝐧𝐭
Correct spacing and cover protect structural strength and durability.

✅ 𝟑. 𝐅𝐨𝐫𝐦𝐰𝐨𝐫𝐤 𝐚𝐧𝐝 𝐩𝐨𝐮𝐫 𝐩𝐫𝐞𝐩 𝐦𝐚𝐭𝐭𝐞𝐫
Good preparation reduces defects like honeycombing and cracks.

✅ 𝟒. 𝐏𝐫𝐨𝐩𝐞𝐫 𝐜𝐮𝐫𝐢𝐧𝐠 𝐢𝐬 𝐧𝐨𝐧-𝐧𝐞𝐠𝐨𝐭𝐢𝐚𝐛𝐥𝐞
Curing affects strength—rushing it can weaken the concrete.

✅ 𝟓. 𝐏𝐥𝐚𝐧 𝐨𝐩𝐞𝐧𝐢𝐧𝐠𝐬 𝐚𝐧𝐝 𝐞𝐦𝐛𝐞𝐝𝐬 𝐞𝐚𝐫𝐥𝐲
Sleeves/conduits should be coordinated to avoid hacking later.

✨ 𝐃𝐞𝐬𝐢𝐠𝐧 𝐰𝐢𝐭𝐡 𝐩𝐮𝐫𝐩𝐨𝐬𝐞. 𝐁𝐮𝐢𝐥𝐝 𝐰𝐢𝐭𝐡 𝐜𝐨𝐧𝐟𝐢𝐝𝐞𝐧𝐜𝐞.
Planning to build soon? Message us—our team can guide you from design to construction.
Stay tuned for Tip 𝟐𝟕 in The Blueprint Series:
𝐌𝐄𝐏 𝐂𝐨𝐨𝐫𝐝𝐢𝐧𝐚𝐭𝐢𝐨𝐧: 𝐏𝐥𝐮𝐦𝐛𝐢𝐧𝐠, 𝐄𝐥𝐞𝐜𝐭𝐫𝐢𝐜𝐚𝐥, 𝐚𝐧𝐝 𝐂𝐞𝐢𝐥𝐢𝐧𝐠 𝐏𝐥𝐚𝐧𝐬.