OneUp Components Philippines

OneUp Components Cockpit Available BUENVIAJE🤘
ONEUP STEM - SRP 5,350
ONEUP CARBON HANDLEBAR - SRP 8,950

Free: Decals Kit for OneUp Handlebars!
Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White
Visit our website bicicletaph.com

ONEUP CARBON BARS. Strong, lightweight & vertically compliant.

The goal for the new OneUp Carbon Handlebars was to make the best feeling bar possible, something which would let us ride harder for longer.

The solution is our patent pending oval shape which combines the best ride characteristics of 31.8mm and 35mm bar standards into one package. This is the most comfortable bar we’ve ever ridden, period. It's strong, lightweight, minimizes arm pump and vibration and maximize steering response. 35 done right.

"The OneUp bar gives me all of the confidence inspiring attributes of a 35mm bar with a bit of forgiveness engineered in for those big descents. I've been so impressed after putting it through the paces for the last year." —Thomas Vanderham



Almost every other carbon bar on the market copies the simple tapered profile of an Aluminum bar. With carbon you can take advantage of more complex shapes to get a better performing product, so that's what we did. If you actually care about bar compliance, then you don't make a regular 35mm diameter bar. Sure you can try to "optimize" the flex slightly with layup, but geometry is king and you're fighting a losing battle.

The OneUp bar profile minimizes the length of the 35 diameter clamping area as this is the stiffest portion of any 35 diameter bar. The 35mm clamp diameter quickly changes to a flattened, oval shape in the transition zone and then to a standard 22.2mm clamp diameter for the control zone.



We bench marked the OneUp bar against the most popular carbon bars on the market as well as foam filled aluminum bars. The results were, on average, a 21% increase in vertical compliance (comfort) coupled with a 28% increase in steering stiffness (responsiveness). These are more than just marginal gains.

Until now the 35mm diameter standard has had a bad reputation and rightly so. This is 35 Dia. done right.

SPECIFICATIONS

Geometry: 800mm Wide / 35mm Dia. / Sweep 8° Back 5° Up

Weight: 20mm Rise (220g) 35mm Rise (225g)

Max Stem Clamp Width: 65mm

Max Stem Clamp Torque: 6Nm

Max Lever Clamp Torque: 5Nm

Minimum Trim width: 740mm

Colour: Black. Decal kits: Available in Red, Green, Blue, Orange, Purple & White

ONEUP - ALUMINUM PEDALS AVAILABLE @ BICICLETA BUENVIAJE 🤘
SRP 7,950
Check our website bicicletaph.com

SPECS:
Weight: 386g
Platform Size: 115x105mm

# of Pins: 10 per side

Axle Material: Chromoly steel

Height: 8.3-12mm

Pin to Axle distance: 112mm

Color: Black, Green, Grey, Blue, Orange, Red, Purple

Body Material: 6061-T6 Aluminum

COMPATIBILITY

Currently, due to the deep counterbore of the crank arms, these pedals are not compatible with SRAM Carbon cranks.
These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.
INSTRUCTIONS

Ensure fl**ge pedal washer and lip seal are assembled with fl**ge side towards crank. In the following orientation.

Install with 8mm Hex. Torque to 35Nm (25 ft-lbs) Min

NOTE:

Uninstalled pedals have a minimal axial movement built in that is eliminated when fully install on cranks.
The retaining O-ring is only to keep the fl**ge washer and seal on pedal in the box and for assembly. It is not necessary for the function of the pedal and can be removed.
Out of the box our pedals have some resistance to free spinning by design. This can be adjusted by adding or removing grease upon disassembly. Free spinning will increase over time and wear of the bushing.
These pedals are not compatible with crank boots without modification to the crank boots. We recommend removing crankboots before installation.
We always recommend the use of pedal washers when installing your pedals.

One Up composite pedals available at Bicicleta Buenviaje
Price: Php 2,950 only