PRINT IT

🔥 10 Things You Need to Know About DTF Print Care 🔥

1. Wait Before Washing
Give your shirt at least 24 hours before the first wash so the print fully sets.

2. Turn Inside Out
Always flip your shirt inside out before washing to protect the design.

3. Use Cold Water
Hot water can damage the print—stick to cold or mild temperature.

4. Gentle Cycle Only
Avoid harsh washing cycles to keep your print looking fresh.

5. Avoid Strong Detergents
Use mild detergent. Bleach is a big NO—it can fade or crack the print.

6. No Fabric Softener
It can weaken the adhesive of the DTF print over time.

7. Air Dry is Best
Hang dry if possible. High heat from dryers can damage the design.

8. If Using Dryer, Low Heat Only
If you must use a dryer, choose low heat settings.

9. Do Not Iron Directly on Print
If ironing is needed, turn the shirt inside out or place a cloth over the design.

10. Avoid Dry Cleaning
Harsh chemicals used in dry cleaning can ruin the print.

Let’s Print Your Idea!

Lanyards everyone 🔥
Send us a message!

Let’s Print Your Idea!

📍Upper Ground Floor- Atrium
📌Talamban Times Square