JBC Innotech Corporation

Wall Panels are permanent formworks made up of 2 cellulose fiber cement board attached by EPS Studs.

4x8 ft or 1.22x2.44 plywood size equivalent to 36 Hollow Blocks.

The system is CIP or Cast-In-Place (Class A, B for load bearing walls and Class C for Architectural Walls)

This will give you a smooth finish and faster turn around time.

Thickness are:

2" Wall Panel for bathroom partitions, partitions and specially fences.
3" Wall Panel are for partitions and fences
4" Wall Panel is the standard architectural wall
5"-6" Wall Panel are also for architectural walls may it be load bearing or non-load bearing walls.

Mid-rise Commercial Building

The use of "JBC Wall Panel" is one of the most fire-resistive building materials available. Mid-rise buildings with installed interior JBC wall panel technology typically qualify for reduced fire insurance rates. Should a fire occur, walls and partitions effectively divide the structure into compartments, separating areas and limiting fire damage to specific compartments.