One of One - Custom Auto

Fresh pipes for this ‘92 Nissan Laurel 🔥
Smooth flow, crisp sound.
Swipe 👉🏻 and turn up the volume.

From Stock to Street-Ready.
This Mazdaspeed3 rolled in bone stock. Now it’s breathing, sounding, and pulling like it should.
We equipped it with a full 4" aluminum air intake, paired with a high pressure fuel pump upgrade kit to safely support more airflow and fuel delivery.
One step colder plugs (LTR7IX-11) went in for more reliable spark under increased boost, while the Damond rear motor mount stiffened up the drivetrain response - goodbye slop, hello sharper shifts.
Out back, our custom-built 3" stainless steel cat-back exhaust, featuring an AdrenalinR mid-muffler and shotgun tips, gave it the bark to match the bite—aggressive tone, clean welds, zero drone.
Cooling? Sorted. We built and installed a full front mount intercooler set-up using a Treadstone core and custom fabricated piping to keep intake temps in check under spirited driving.
This setup is clean, functional, and fully done in-house.
If you’re driving a Mazdaspeed and still stock or lightly modded—this is your sign. These upgrades don’t just wake the car up, they transform the entire driving experience.

📍Ready to upgrade your Speed? Send us a message or drop by the shop. We’ll build it right, just like we did this one.

🏎 Pickering

New to Mazdaspeed and looking to get started with mods? Here’s a rundown of the first power mods you should consider:

Upgraded Fuel Pump Internals
Mazdaspeed engines are notorious for having high-pressure fuel pump (HPFP) limitations, especially when you start adding power. Upgrading the fuel pump internals is a must if you’re tuning your car. This upgrade ensures your engine gets the fuel it needs, especially at higher RPMs.

3.5” Air Intake
A cold air intake is one of the most popular mods for good reason. It improves airflow, giving you a noticeable bump in throttle response and power. Plus, it adds that sweet spooly sound! Go custom to ensure quality fitment and gains.

Upgraded Intercooler
The stock intercooler does a decent job, but once you start pushing for more power, heat becomes an issue. A front-mount intercooler will help keep those intake temperatures down, ensuring your engine breathes cooler, denser air. This is crucial for maintaining performance, especially during hot summer drives or track days.

Downpipe and Exhaust
Opening up the exhaust is one of the best ways to free up some extra power. A high-flow downpipe reduces backpressure, allowing the turbo to spool quicker and making your Mazdaspeed feel more responsive. Pair it with a cat-back exhaust for an aggressive sound that matches the new performance.

Rear Motor Mount
The stock mount is known to be a weak spot, causing excessive engine movement, wheel hop, and sloppy shifts. Swapping it out for an upgraded mount improves power delivery, reduces vibrations, and tightens up the overall driving feel. Plus, it’s a relatively easy install.

One Step Colder Spark Plugs
It’s a simple and affordable upgrade that helps avoid pre-ignition, and supports higher boost levels. Perfect for anyone planning to add more power down the line.
*The plugs will need to be gapped to avoid misfire.

ECU Tuning
If there’s one mod that can transform your Mazdaspeed, it’s a proper tune. Tuning is required for a larger intake and a downpipe. While you may not necessarily need a tune after adding parts, it’s important to remember these 2 things: when you’re modifying a car that changes the amount of air going into or leaving the engine; or altering any aspect of the fuel system, then you will need a tune.

The best part about modding your Mazdaspeed is that each upgrade makes the car feel more personal and exciting to drive. Start with these foundational mods, and you’ll be well on your way to turning your Mazdaspeed into the most enjoyable version of itself. Remember, each mod works best when paired with the right tune, so take your time, enjoy the process, and make sure you’re getting the most out of every upgrade.

Hear the sound of these cars come to life with just an axle~back exhaust, all custom-made and installed.

DM us if you want some noise 📢