Keel Roll Forming Machine

One of the most common building and construction materials is the steel stud and track. The machine that is used to form these steel studs and track is the �Stud Roll Forming Machine�. The common configuration includes advanced features such as automatic material thickness (gauge) control and material handling systems. The Stud Roll Forming Machine is an integral part of the success of any stud supplier and is often the heart of the operation. In our service, we support the equipments and profiles that customers really need and including our most sincere recommends.

De coiler 2 ton cap.
Entry Gate with
Roll Forming Line with 9 station , 1 Gear Boxes & 5 H.P. electrical.
Control Panel semi auto
Cutting Unit
Technical Specifications: (Plate body)

Maximum sheet width that can be formed : 600 mm
Maximum sheet thickness in G I Strips that can be formed : 1 mm
Vertical distance between shafts : 100 mm
Horizontal distance between shafts : 190 mm
Number of forming stations: 9 nos.
Vertical station: 7 nos.
Total HP for Line : 5 (ABB)
Speed of the machine : 4mt/minute
Size of machine : 1600 x 800 x 1100 mm
Mandrel Uncoiler

Coil weight : 2 MT Max
Coil width : 600 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted

Stud Roll Forming Machine | Stud Making machine | Manufacturers | India Manufacturers Of Stud Roll Forming Machine, Metal Stud Roll Forming Machine, Roofing Sheet Roll Forming Machine, Corrugated Roll Forming Machine, Guardrail Roll Forming Machine In Rajkot- India.

Corrugated Roll Forming Machine can manufacture different profile of stainless steel roofing sheet and wall sheets as per customer requirement drawing and necessity. This profile is new structure equipment with different width. It make many reward like low product capacity, easy installation, high strength.

D coiler 5 ton cap.
Entry Gate with
Roll Forming Line with 18 stations, 10 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Technical Specifications

Maximum sheet width that can be formed : 1250 mm
Maximum sheet thickness in CRCA Strips that can be formed : 1.2 mm
Horizontal distance between shafts : 500mm
Number of forming stations : 16 nos.
Total HP for Line : 8
Speed of the machine : 10 -14 mt / mint
Size of machine : 9500 x 1700 x 1100 mm
Mandrel Uncoiler

Coil weight : 5 MT Max
Coil width : 1250 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted
Entry Gate

Entry gate will be provided for movement of sheet to roll former.

Main Base

the main base is MS fabricated structure and adequately ribbed to minimize the distortion. It is accurately machined on top and bottom surfaces the threaded holes are made on the bed for positioning the stands.

Mill stands (Station)

The stands are mounted on the bed of the machine the line alignment can be easily done due to guide ways arranged on the bed of the machine. Each forming head consists of a fixed housing and sliding type out board housing. The mill stands will be arranged to locate shafts mounted on taper bearings. For the top shafts the bearings are housed in the cartridge type bearing blocks. The bottom shaft bearings are located in the bored machined in the housings. The bottom arbors are fixed in position whereas the top arbors along with cartridge blocks could be raised or lowered in vertical guides machined in housings.

Corrugated Roll Forming Machine | Corrugated Sheet Making Machine | Trapezoid Roll Forming Machine Corrugated Roll Forming Machine can manufacture different profile of stainless steel roofing sheet make many reward like low product capacity, easy installation, high strength.

The Pop Cross Channel Making Machine can Manufacturing a various kinds of Section Like Furring Channel, Pop ultra Channel, False Ultra Ceiling Channel, Wall Angle, Pop Main Channel, False Ceiling Section, Intermediate Channel, Ceiling Angle, Gypsum Perimeter Section, Metal Stud and Cross Section Profile to satisfy customers� required. Produced Ultra Channel are in fashionable outline and high superiority. Pop Section are so mostly used in our Home Decoration , so this machine will surely bring you a lot of profitable benefits to you.

D coiler 250 KG cap.
Entry Gate with
Roll Forming Line with 8 station , 1 Gear Boxes & 5 H.P. electrical.
Control Panel semi auto
Cutting Unit (Hydro.)
Technical Specifications
Maximum sheet width that can be formed : 450mm
Maximum sheet thickness in CRCA Strips that can be formed : 0.6 mm
Horizontal distance between shafts : 160
Number of forming stations : 8 nos.
Vertical station : 2 nos.
Total HP for Line : 7.5
Speed of the machine : 7mt/minit
Size of machine : 2300 x 1100 x 1100 mm
Mandrel Uncoiler
Coil weight : 250 KG Max
Coil width : 450 MM
Coil bore : 450 MM min, 510 MM max dia.
Mandrel movement : Manually adjusted
Back Tension : Manually adjusted

Pop Cross Channel Machine | Pop Channel Patti Machine | Pop Bottom Patti Roll Forming Machine | Pop Channel Machine Manufacturers of Pop Channel Roll Forming Machine, Pop Channel Patti Making Machine, Pop Section Roll Forming Machine, Gypsum Channel Machine, False Ceiling Machine In Rajkot-India.