New Qbitronics

his Device is used to Switch ON / OFF the Motor or Starter by Remotely by Hand RF Remote.


This Device Have 3 Different Models,

1.RF 1 PHASE MOTOR REMOTE CONTROLLER-v1: 100 to 300 Meters: Use For Motor Switch /MCB

2.RF 1 PHASE MOTOR REMOTE CONTROLLER-v2: 300 to 700 Meters: Use For Motor Switch /MCB

1.RF 1 PHASE MOTOR REMOTE CONTROLLER-v1: 100 to 300 Meters: Use For Motor 1 Phase Starter

2.RF 1 PHASE MOTOR REMOTE CONTROLLER-v2: 300 to 700 Meters: Use For Motor 1 Phase Starter

1.RF 1 PHASE MOTOR REMOTE CONTROLLER-v1: 100 to 300 Meters: Use For Motor 3 Phase Starter-DOL/Star Delta

2.RF 1 PHASE MOTOR REMOTE CONTROLLER-v2: 300 to 700 Meters: Use For Motor 3 Phase Starter-DOL/Star Delta

Support 1/2 HP to 20 HP -30A Maximum Load

Device Input Voltage: 230V AC/50HZ

Remote : 9V DC Battery

Device Inputs
1. Neutral 2. Phase
Device Outputs to connect:
3. Starter normally open 1 (ON SWITCH LINE)
4. Starter normally open 2 (ON SWITCH LINE)
5. Starter normally close 1 (OFF SWITCH LINE-connect OFF switch end)
6. Starter normally close 2 (OFF SWITCH LINE –connect to coil end)
The Bellow Connection will support Manual your Starter Switch and Remote Control also.
(NOTE: While pressing the ON button the motor turns ON with a delay of 5 seconds which is
indicated by blue LED in the device. While pressing the OFF button the motor turns OFF and then blue LED is off in this device) We have RF Starter Remote Controller for Starter Motor 1 /2 / 3-Phase: minimum 100 to 500 Meters Range
Video link Connection Details:
https://www.youtube.com/watch?v=rdeSucO5QKo&t=9s
Demo for Industrial use: client
https://youtu.be/l7uIb5lTIPE
Demo for Agriculture use:client
https://youtu.be/fzAwxSRO4_4

Description
QBITSTRV1 controller is used for dynamic color (white) lighting of the stairs.
The backlight is switched on with the controller subsequent steps, depending on the
motion directions: ascending or descending
The controller is adapted to control the WHITE LED strips arranged in stair steps and
possibly the staircase handrails.
Lights can be turned on by pressing Automatic, connected to the controller or by the
use of additional sensor (motion) to detect when the person steps on the stairs.
The controller is designed specifically for use with miniature motion sensors. It can be
directly connected to the inputs of the controller without additional matching
components.
The controller can be operated with low voltage motion sensors or motion detectors for
5V-DC only.

Technical data:
• Power supply - 12V stabilized (external)
• Maximum electric current of LEDs at one step support – 12V/5 to 10 watts
• Max. Steps : 1 to 24
The LED on the case - signaling operation.
• Dimensions: length - 150 mm (6 in), width - 90 mm (3.5 in), height - 67 mm
(2.6 in)

Device Inputs
1. Neutral
2. Phase
Device Outputs to connect:
3. ON SWITCH LINE-L input
4.L Line out to Motor L Line.
The Bellow Connection will support Manual your Starter Switch and Remote Control
also
We have RF Starter Remote Controller for Starter Motor 1 /2 / 3-Phase: minimum 100 to
500 Meters Range
Video link Connection Details:
https://www.youtube.com/watch?v=rdeSucO5QKo&t=9s
Demo for Industrial use: client
https://youtu.be/l7uIb5lTIPE
Demo for Agriculture use: client
https://youtu.be/fzAwxSRO4_4