Sky Gear Experts

Aerodyne🚨 SERVICE BULLETIN SB300426 – MANDATORY UPDATE
Aerodyne has issued a mandatory configuration update for ICON systems (Sizes 1–5).
✔ AAD cutter must be placed above the reserve pilot chute
✔ Applies to both NEXGEN and Pre-NEXGEN
✔ Compliance required before next jump
Identify your ICON by checking the warning label on your system:
• ICON NEXGEN: Serial number starts with “IX”
• ICON PRE-NEXGEN: Serial number starts with “IN”https://www.flyaerodyne.com/e_files/content/SERVICE_BULLETIN_-_30042026_-_AAD_V1.pdf

Aerodyne updated TB-250122 from Recommended to Mandatory.
AAD Cutter placement to be moved from the existing position on reserve flap #1 to reserve flap #3.
Icon containers affected: IX- series from sizes I-1 through I-5/S-5 which are fitted with an AAD.

Aerodyne would like to provide a further update regarding the ongoing investigation into the incident in the United Kingdom.

The investigation, led by British Skydiving, remains ongoing, and at this stage, no conclusions have been reached regarding the cause of the incident or the equipment's performance.

We continue to support the process and are working in cooperation with all relevant authorities. Investigations of this nature are complex and may take time, and early-stage information may be incomplete or subject to change.

🔹 AAD Cutter Placement – Configuration Update
As previously communicated in Technical Bulletin TB-250122 (2022), Aerodyne identified AAD cutter placement as a configuration consideration based on internal testing and issued a recommendation for certain configurations.

In line with ongoing product evaluation and to promote global consistency in configuration, Aerodyne will now be formalizing this existing recommendation as a mandatory configuration requirement. A separate communication will be issued outlining the implementation details.

Both cutter positions have been tested and approved, and the system has been in service for many years with successful reserve activations in operational conditions.

This step reflects a standardization of configuration, and not the result of any findings from the current investigation.

🔹 Our Commitment
Aerodyne remains fully dedicated to supporting the investigation process, upholding the highest standards of safety, quality, and performance, and providing clear, accurate updates as new information emerges.

We recognize the level of discussion within the skydiving community and appreciate the shared focus on safety. We encourage reliance on verified information from official sources as the investigation progresses.

Further updates will be provided as appropriate.