LPM SIM

𝑭𝑳𝑬𝑿-𝑭𝑹𝑬𝑬 𝑨𝑳𝑼𝑴𝑰𝑵𝑰𝑼𝑴 𝑺𝑰𝑴-𝑹𝑰𝑮𝑺 𝑺𝑻𝑨𝑹𝑻𝑰𝑵𝑮 𝑭𝑹𝑶𝑴 𝟐𝟎𝟎𝑮𝑩𝑷
Any bespoke aluminum projects are accepted
𝐃𝐈𝐌𝐄𝐒𝐍𝐈𝐎𝐍𝐒:
ʟ130 x 60ᴡ x 70ʜ
𝐂𝐎𝐋𝐋𝐄𝐂𝐓𝐈𝐎𝐍 𝐎𝐑 𝐏𝐎𝐒𝐓𝐀𝐆𝐄 𝐈𝐒 𝐀𝐕𝐀𝐈𝐋𝐀𝐁𝐋𝐄 𝐀𝐓 𝐁𝐔𝐘𝐄𝐑𝐒 𝐂𝐎𝐒𝐓
ʟᴏᴡ ᴄᴏꜱᴛ ᴘᴏꜱᴛᴀɢᴇ
𝐎𝐏𝐓𝐈O𝐍𝐀𝐋 𝐏𝐄𝐃𝐀𝐋 𝐈𝐍𝐕𝐄𝐑𝐓 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃 𝐖𝐈𝐓𝐇 𝐓𝐇𝐄 𝐑𝐈𝐆
ᴄᴜꜱᴛᴏᴍᴇʀ ᴇxᴀᴍᴘʟᴇ ɪꜱ ꜱʜᴏᴡɴ ᴏɴ ʟɪꜱᴛɪɴɢ
𝐓𝐎𝐍𝐒 𝐎𝐅𝐅 𝐕𝐎𝐔𝐂𝐇𝐄𝐒 𝐀𝐍𝐃 𝐏𝐑𝐎𝐎𝐅 , 𝐏𝐋𝐔𝐒 𝐀 𝐂𝐔𝐒𝐓𝐎𝐌𝐄𝐑 𝐃𝐈𝐒𝐂𝐎𝐑𝐃
ᴘᴇᴀᴄᴇ ᴏꜰꜰ ᴍɪɴᴅ ᴀɴᴅ ᴀ ᴛʀᴜꜱᴛᴇᴅ ꜱᴇʀᴠɪᴄᴇ ɢᴜᴀʀᴀɴᴛᴇᴇᴅ!
𝗔𝗡𝗬 𝗤𝗨𝗘𝗦𝗧𝗜𝗢𝗡𝗦 𝗗𝗢𝗡𝗧 𝗛𝗘𝗦𝗜𝗧𝗔𝗧𝗘 𝗧𝗢 𝗔𝗦𝗞

𝑭𝑳𝑬𝑿-𝑭𝑹𝑬𝑬 𝑨𝑳𝑼𝑴𝑰𝑵𝑰𝑼𝑴 𝑺𝑰𝑴-𝑹𝑰𝑮𝑺 𝑺𝑻𝑨𝑹𝑻𝑰𝑵𝑮 𝑭𝑹𝑶𝑴 𝟐𝟎𝟎𝑮𝑩𝑷
𝐃𝐈𝐌𝐄𝐒𝐍𝐈𝐎𝐍𝐒:
ʟ130 x 60ᴡ x 70ʜ
𝐂𝐎𝐋𝐋𝐄𝐂𝐓𝐈𝐎𝐍 𝐎𝐑 𝐏𝐎𝐒𝐓𝐀𝐆𝐄 𝐈𝐒 𝐀𝐕𝐀𝐈𝐋𝐀𝐁𝐋𝐄 𝐀𝐓 𝐁𝐔𝐘𝐄𝐑𝐒 𝐂𝐎𝐒𝐓
ʟᴏᴡ ᴄᴏꜱᴛ ᴘᴏꜱᴛᴀɢᴇ
𝐎𝐏𝐓𝐈O𝐍𝐀𝐋 𝐏𝐄𝐃𝐀𝐋 𝐈𝐍𝐕𝐄𝐑𝐓 𝐈𝐍𝐂𝐋𝐔𝐃𝐄𝐃 𝐖𝐈𝐓𝐇 𝐓𝐇𝐄 𝐑𝐈𝐆
ᴄᴜꜱᴛᴏᴍᴇʀ ᴇxᴀᴍᴘʟᴇ ɪꜱ ꜱʜᴏᴡɴ ᴏɴ ʟɪꜱᴛɪɴɢ
𝐓𝐎𝐍𝐒 𝐎𝐅𝐅 𝐕𝐎𝐔𝐂𝐇𝐄𝐒 𝐀𝐍𝐃 𝐏𝐑𝐎𝐎𝐅 , 𝐏𝐋𝐔𝐒 𝐀 𝐂𝐔𝐒𝐓𝐎𝐌𝐄𝐑 𝐃𝐈𝐒𝐂𝐎𝐑𝐃
ᴘᴇᴀᴄᴇ ᴏꜰꜰ ᴍɪɴᴅ ᴀɴᴅ ᴀ ᴛʀᴜꜱᴛᴇᴅ ꜱᴇʀᴠɪᴄᴇ ɢᴜᴀʀᴀɴᴛᴇᴇᴅ!
𝗔𝗡𝗬 𝗤𝗨𝗘𝗦𝗧𝗜𝗢𝗡𝗦 𝗗𝗢𝗡𝗧 𝗛𝗘𝗦𝗜𝗧𝗔𝗧𝗘 𝗧𝗢 𝗔𝗦𝗞

Ｍａｔｈｅｗｓ ｂｕｄｇｅｔ ｂｕｉｌｄ！ (ʟᴏɴɢ ʀᴇᴀᴅ ʙᴜᴛ ʀᴇᴀʟʟʏ ᴡᴏʀᴛʜ ɪᴛ)

"So I decided to try and make the highest quality sim setup for as cheap as possible as I cannot afford to buy expensive gear

𝐒𝐨 𝐟𝐨𝐫 𝐩𝐞𝐝𝐚𝐥𝐬 𝐈 𝐰𝐞𝐧𝐭 𝐰𝐢𝐭𝐡 𝐒𝐢𝐦𝐦𝐬𝐨𝐧 𝐩𝐫𝐨 𝐥𝐨𝐚𝐝 𝐜𝐞𝐥𝐥 𝐩𝐞𝐝𝐚𝐥𝐬.
These are by far the best upgrade you can make, I took nearly 3 seconds off my laps because they are load cell once you find your brake points it’s all down to muscle memory then ! Also the software is super simple and easy to use, it looks out dated but does exactly what you need and abit more so I think it’s great. These pedals where less than £140 and have a lot of adjustments and spares including different springs and rubbers my consistency also went through the roof as again muscle memory is a great thing 🙂

𝗡𝗼𝘄 𝗳𝗼𝗿 𝗺𝘆 𝗿𝗶𝗴obviously I needed a way to bolt the pedals to something as they have a 200kg max load cell so something flimsy wasn’t going to cut it but at the same time £450 for a rig was off the cards until I stumbled upon LPM sim rigs at first I thought it was a mistake or scam… no way something that looks this good could be real ? But it was and is ! So bought the LPM sim rig for £200 and will be buying another for the wife at some point as well ! Thanks
This rig is everything you could possible need other than having triple screen stands… but LPM also sell this as a stand alone so will be buying this as well 😂

So I got the pedals and rig I just need a wheel base,wheel and of course something to sit on …
I was super lucky with 𝐦𝐲 𝐬𝐞𝐚𝐭, it’s from a Subaru Impreza wrx sti and my friend had one laying around so I was kindly gifted that ( thanks Tim )
𝗕𝘂𝘁 𝗜 𝘄𝗼𝘂𝗹𝗱 𝘀𝘂𝗴𝗴𝗲𝘀𝘁 𝗹𝗼𝗼𝗸𝗶𝗻𝗴 𝗶𝗻 𝗹𝗼𝗰𝗮𝗹 𝘀𝗰𝗿𝗮𝗽 𝘆𝗮𝗿𝗱𝘀for something similar but would strongly suggest against the Subaru one, it’s comfy looks great but the mounts are all different heights and shapes so where an absolute mind bending experience to fit

𝘼𝙜𝙖𝙞𝙣 𝙫𝙚𝙧𝙮 𝙡𝙪𝙘𝙠𝙮 𝙬𝙞𝙩𝙝 𝙢𝙮 𝙬𝙝𝙚𝙚𝙡 𝙖𝙣𝙙 𝙗𝙖𝙨𝙚
Both second hand and both from Facebook market place !
𝐓𝐡𝐞 𝐰𝐡𝐞𝐞𝐥 𝐛𝐚𝐬𝐞 𝐢𝐬 𝐚 𝟕.𝟐𝐧𝐦 𝐝𝐢𝐫𝐞𝐜𝐭 𝐝𝐫𝐢𝐯𝐞 𝐦𝐢𝐠𝐞 𝐦𝐨𝐭𝐨𝐫 𝐬𝐞𝐭𝐮𝐩! Super smooth responsive and relatively powerful a huge upgrade from my g29 however anyone who thinks a direct drive will improve their outright pace and lap times unfortunately this isn’t entirely the case, your feeling will improve ,
precision and consistency also but you’ll maybe find half a second tops
( 𝐩𝐞𝐝𝐚𝐥𝐬 𝐚𝐫𝐞 𝐥𝐞𝐚𝐠𝐮𝐞𝐬 𝐛𝐞𝐭𝐭𝐞𝐫 𝐟𝐨𝐫 𝐥𝐚𝐩 𝐭𝐢𝐦𝐞𝐬 )

I paid £200 for this base and it’s from sim-plicity a small British company much like LPM and much like LPM it’s top notch !
Please look at these bases before buying an expensive one as mige is the way forward !

𝐈 𝐚𝐥𝐬𝐨 𝐠𝐨𝐭 𝐚 𝐬𝐞𝐜𝐨𝐧𝐝 𝐡𝐚𝐧𝐝
Fanatec gt3 McLaren wheel that had been usb converted for £75 which is insane !
𝗦𝗼 𝗮𝗹𝗹 𝗶𝗻 𝗮𝗹𝗹 𝗺𝘆 𝘀𝗲𝘁𝘂𝗽 𝗵𝗮𝘀 𝗰𝗼𝘀𝘁 𝗹𝗲𝘀𝘀 𝘁𝗵𝗮𝗻 £𝟭𝟬𝟬𝟬
I have an aluminium rig
A bucket seat
Direct drive
A gt3 wheel
And most importantly load cell pedals
And I’m really happy I went this route"

I wanted to share matthews story as it proves you can build a good rig for a low cost if you save over time!! , really appreciated working with matthew my self :)

i also agree with him pedals can be more important than the wheelbase , but youll always be faster with a DD than a gear/belt driven wheelbase!!

thanks for your time!

discord link with photos off customers rigs and can ask any questions their to 🙂

Join the LPM SIM RIGS's Discord Server! Check out the LPM SIM RIGS's community on Discord – hang out with 63 other members and enjoy free voice and text chat.

any problems messaging me message Lpm Sim Extrusion Rigs :)