R.K Computer Center Pvt.ltd

Ever failed means never tried

To create a bootable USB flash drive

Insert a USB flash drive into a running computer.

Open a Command Prompt window as an administrator.
Type diskpart.

In the new command line window that opens, to determine the USB

flash drive number or drive letter, at the command prompt,

type list disk, and then click ENTER.
The list disk command displays all the disks on the computer
Note the drive number or drive letter of the USB flash drive.

At the command prompt, type select disk , where X is the drive number or drive letter of the USB flash drive, and then click ENTER.

Type clean, and the click ENTER. This command deletes all data from the USB flash drive.

To create a new primary partition on the USB flash drive, type create part pri, and then click ENTER.

To select the partition that you just created, type select part 1, and then click ENTER.

To format the partition, type format fs=ntfs quick, and then click ENTER.

System_CAPS_ICON_important.jpg Important
If your server platform supports Unified Extensible Firmware Interface (UEFI), you should format the USB flash drive as FAT32 rather than as NTFS. To format the partition as FAT32, type format fs=fat32 quick, and then click ENTER.
Type active, and then click ENTER.
Type exit, and then click ENTER.
When you finish preparing your custom image, save it to the root of the USB flash drive

Windows Instructions

1

Run Microsoft Update to make sure that your copy of Microsoft Word is up to date.
2

Download and install the correct Microsoft Compatibility Pack for your version of Microsoft Word (see Resources).

Sponsored Links
gateway ip

The easiest way to access private IP devices. Try it NOW!
www.moxa.com
3

Double-click your .docx file to open it. Microsoft Word will automatically translate the file.
4

Go to the "File" menu and select "Save As..."
5

Change the "Save as type:" field to "Word Document (*.doc)" and click "Save."

Macintosh Instructions

6

Go to the "Help" menu and select "Check for Updates." Download and install the latest Microsoft Word updates.
7

Download and install the current Open XML File Format Converter for Macintosh (see Resources).
8

Double click the .docx file to open it.
9

Click "Convert" when the window pops up asking if you want to convert the document.
10

Go to the "File" menu and select "Save As..." Change the "Format:" pop-up menu to "Word Document." Click "Save."

Sponsored Links


Read more : http://www.ehow.com/how_5070632_convert-docx-file-doc.html

moxa.com

How to Repair an HP Motherboard
By Ezekiel James, eHow Contributor

Share
Pin
Tweet
Stumble
Share

How to Repair an HP Motherboard thumbnail Repairing your HP laptop's motherboard involves replacing it with a working motherboard.

Motherboard repair is a tricky procedure. Motherboard diagnosis is time-intensive, and often the diagnosis equipment is too costly for the average computer user. In fact, many laptop repair technicians will advise you to replace the entire motherboard. Fortunately, you can perform this procedure yourself without much electronics experience. Replacing your HP laptop's motherboard is a matter of dismantling the computer and removing all components that attach to the motherboard. However, doing so will void your computer's warranty.


Read more : http://www.ehow.com/how_7671682_repair-hp-motherboard.html

How to Repair an HP Motherboard | eHow Motherboard repair is a tricky procedure. Motherboard diagnosis is time-intensive, and often the diagnosis equipment is too costly for the average computer user. In fact, many laptop repair technicians will advise you to replace the entire motherboard. Fortunately, you can perform this procedure you…