Kippo Models

Class 47 with 9 mk1s, Gauge 3 scale,
3d printed model loco, with all wheel drive and fully sprung with independent suspension.

British Rail MK1 BG

The BG was a parcels coach that doubled as a brake coach with a Gaurds compartment and a handbrake.It had a corridor connection so it could be run with other passenger stock. A very useful coach as it could be found on local trains, parcels, fast passanger, and royal mail trains.
This coach is the shorter 57 foot frame.
It will make it around 7 foot radius happily.
It uses a strong construction where the side panels consist of a 2mm
clear pre curved plastic panel. This forms the main strength of the body and also doubles as the glazing. The outside of the coach sides, consists of 1mm
thick facia panels, with molded door hinges, door stops, rain strips and window holes. The top of the coach sides are supported by a 2x10mm aluminium bar, this ensures the top is rigid and forms a base for the roof clips.The kit also inludes a one piece molded solebar/floor section and one piece precurved roof panel.

Not included are buffers, couplings, roof vents or bogies.

It can be purchased here from our website

https://kippomodelsuk.com/store/p_2777614/br-mk1-bg-brake-gangwayed

Cornish engine house,
Customers keep asking me to make this so here we are! Chimney coming next,
This has been done in 1/19 scale and its massive! About 70cm tall, as its a particularly big engine house and to scale. The chimney will stand even taller.. This is the first one from the mold, the corner joints haven't been cleaned up yet and will fit a bit more flush once done, corner joins will also need to be filled, in the same style as our other buildings, the stones were by done tracing over real Engine house stone work, to look more realistic, the resin walls are 25mm thick and are of a composite molding. Pictured also is a real one and what it will look like once complete

It was great to see the Flying Scotsman tonight, looks like the local police enjoyed it too!

Our new station Halt kit, this utilities the existing platform edging with some new flat brick edging for the rear, this is so the fence panels can butt up against it, the platform comes with a one piece foamex top.
The platform could in theory be made to any length as the fencing and brickwork are modular