Codembit

This post covers getting started with developing and debugging embedded Rust applications by using STM32F0 Discovery kit and vscode.

https://www.codembit.com/blogs/embedded/stm32/rust/STM32F072/getting_started_with_rust_and_stm32f072.html

If you need to debug embedded systems, RTT might be your choice. Here is something to get you started.

https://www.codembit.com/blogs/embedded/ekra6m4/rtt/how_to_use_rtt_with_ekra6m4.html

Good memories, check this out!

https://www.codembit.com/blogs/embedded/ekra6m4/qspi/how_to_use_qspi_flash_with_ekra6m4_board.html