NT Load Balancing Solutions

Peplink Balance-20
Feature Summary
The feature summary below from Peplink's Balance model comparison chart.
•(2) WAN Ports (GbE)
•(1) USB WWAN Port (supports 4G/3G modems)
•(4) LAN Ports (GbE)
•Rated Throughput = 100 Mbps
•WAN Load Balancing and Failover
•NAT/PAT
•Multiple IP Address Support Per WAN interface
•Supports up to 25 LAN Users (recommended)
•Supports up to 3 PPTP users
•Supports up to 2 Site-to-Site VPN Tunnels
•Bandwidth Usage Monitor
•QoS Controls
•SIP, H.323 ALG
•UPnP
•Dynamic DNS

A Peplink Balance feature not available on the Balance 20, but worth mentioning is Peplink's trademarked SpeedFusion feature, which is available on the Balance 210 and above.

Peplink's SpeedFusion bonds VPN traffic between Peplink routers over multiple WAN interfaces, effectively increasing the bandwidth available to the VPN connection, as well as increasing reliability. This is unique among multi-WAN routers I've tested.

Every other multi-WAN router I've tested will run a VPN connection over a single WAN interface that may fail over to a secondary interface if the primary interface goes down. A SpeedFusion VPN tunnel will reportedly use multiple interfaces simultaneously for the VPN tunnel and so will not be interrupted even if an interface fails, as depicted in the below image.

Peplink Stress Testing Facilities

Peplink + Citrix + VoIP Adds Up to Fast, Cost-Effective WAN for Pluss

See how Pluss is delivering better service to its clients -- while saving money -- with Peplink