CSS Electronics

💥 New: CANedge3 - 2 x CAN/LIN (SD + 3G/4G + GPS/IMU):

https://www.csselectronics.com/products/can-bus-data-logger-4g-lte-canedge3-gnss

The CANedge3 is now in stock!

Key features include:

⚡️ PLUG & PLAY: Log data out-the-box. Standalone. Link your CAN bus to your server in

💥 Boom! CANedge with GPS/IMU now in stock:
https://www.csselectronics.com/products/can-bus-data-logger-wifi-canedge2-gnss-imu

We have now launched the CANedge1/CANedge2 with internal GNSS and 3D Inertial Measurement Unit (IMU).

In short: It's a CANedge + CANmod.gps - but in one device!

Below are key features (focused on the GNSS/IMU functionality):

🌎 GNSS/IMU: Add 40+ GNSS/IMU signals to your 2 x CAN/LIN data, incl. position, speed, trip distance, XYZ acceleration, roll/pitch/yaw and more

🔍 COMPACT: The CANedge incl. GNSS/IMU is 70%+ more compact vs. using a CANmod.gps, bracket and adapter

💰 LOW COST: Upgrading to a CANedge incl. GNSS/IMU is 60%+ lower cost vs. adding a CANmod.gps, bracket and adapter

🗜 2 X CAN: By internalizing the CANmod.gps functionality, you no longer "block" a CAN channel on the CANedge

💫 SENSOR FUSION: 3X higher positioning accuracy via sensor fusion - even in GNSS hostile areas (parking lots, tunnels, mines)

⚡️ HIGH FREQUENCY: Output all GNSS/IMU messages at up to 5 Hz (vs. 1 Hz for most CANmod.gps messages)

⚙️ CONFIGURABLE: Fully customize which GNSS/IMU messages to record (and at what frequency)

📎 DBC FILE: DBC file for easy decoding of recorded GNSS/IMU messages to physical values

⌚️ RTC SYNC: Optionally sync the CANedge RTC via the internal high-precision GNSS time for continuous sub-second sync

🔧 MOUNT: Easily install the device via the new CANedge flanges and the external GPS antenna

💡 PRO SPECS: The device uses the cutting-edge u-blox NEO-M9V module for enhanced precision and features

We hope you'll enjoy this new addition to the CANedge range!

If you have any questions, feel free to ask in the comments or via our contact form.

CANedge2: 2x CAN Bus Data Logger (SD + WiFi + GNSS/IMU) The CANedge2 is a 2 x CAN/LIN data logger with 8-32 GB SD card, WiFi and GNSS/IMU. Perfect for CAN bus telematics, automotive R&D and remote diagnostics. Buy now!

Get your DBC file today! 🚜
https://lnkd.in/eZsmcqjT

Do you need to decode data from your tractor/implement ISOBUS? If so, this DBC file is a great time saver!

The DBC file contains ~100 ISOBUS PGNs and 650+ SPNs, based off the public ISOBUS decoding rules (primarily from ISO 11783-7).

This makes it useful in processing raw ISOBUS data from tractors and implements (sprayers, seeders, ...) that you've recorded using e.g. the CANedge.

The ISOBUS DBC can of course be combined with our J1939 DBC and NMEA 2000 DBC - all of which will be relevant in most agriculture vehicle applications.

As always, contact us if you'd like us to decode a sample of data - or if you have any questions!

- CANedge: https://lnkd.in/eWf6ZFka
- PGN converter: https://lnkd.in/ekEqzZGy
- J1939 data logging: https://lnkd.in/gvpSYAK6

ISOBUS DBC File - Decode Tractor Data [ISO 11783-7 Database] The ISOBUS DBC file contains ~100 PGNs and 650+ SPNs, letting you decode ISO 11783-7 CAN bus data from agricultural machinery like tractors, harvesters and sprayers.