Noble Ronin Scale Models

I tried my hand at making some quick and cheap Decals of my Logo, to add to the Racing Helmet.
I chose to use the Packing Tape method.
Printing these with an Inkjet though, is not favorable, and a Lazerjet is what should be used.
So, my work-around…
Using a wet Cotton Swab, I rubbed the Paper off the backside of the Tape, but only the upper portion, instead of the entirety as you traditionally would with this technique. And due to not removing all of the Paper, the Decals need to be glued in place.

Thanks for looking!