Netexpertbd

What is Load Balance ??

Network load balancing is the ability to balance traffic across two or more WAN links without using routing protocols like BGP.

Load Balancing's aim is to spread traffic across multiple links to get better link usage. This can be done on one per-packet or per-connection basis.

Route Failover

This example explains how to use multiple gateways with one taking over when first fails. It begins with adding the gateways. Configure larger distance value for the secondary one, and check-gateway for the first one:

/ip route add gateway=192.168.111.1 distance=1 check-gateway=ping
/ip route add gateway=192.168.2.1 distance=2

e first gateway will begin as its distance is smaller (default 1); the check-gateway will make sure it is up. When the ping will fail, it will disable the first gateway and the second will take over and when the first one comes up, it will return to its function.

09-ISP Link Redundancy Using MikroTik || Net Expert BD || Lesson 9 ||

In computer networking, the Load Balancing technique is used to send network traffic over multiple gateways. If you have multiple ISP connections available, you can use load balancing technique to establish a stable network. You may now ask, why will I use multiple ISP connections? What are the benefits to use multiple ISP connections in my network? For your satisfaction, the following points are some reasons to use load balancing techniques in your network.

No ISP can give you 100% uptime guarantee. So, it will be better to use more than one ISP connection to ensure 100% uptime network.
Sometimes you may have dependencies (such as Mail, IPPBX etc.) on your uplink ISP but their service is not so good. In this case, you can use another ISP which provides better service.
Your current ISP is better but high paid bandwidth. In this case, you can purchase another ISP bandwidth which is cheap but their connection is good, not better.

If these are your current status, it is suggested to configure a load balancing and link redundancy network with multiple gateways. MikroTik Router has various load balancing and link redundancy methods (such as ECMP method, PCC method and PBR method) to establish a stable network. Among these, PBR (Policy Based Routing) is simple but efficient method to make a stable load balancing and link redundancy network. In this article, I will discuss how to create a load balancing and link redundancy network over two WAN connections using Policy Based Routing in MikroTik Router.

n this video i informed that how to manage Two ISP for failover system . If any one iSP goes down alternative isp will be ON and no interruption in LAN Site .

MY info is Given below .

👉Facebook Group: https://www.facebook.com/groups/13053...
👉page https://www.facebook.com/search/top?q...
👉Whatsapp: +8801729201335
👉Web: https://netexpertbd.com
👉linkedin: https://www.linkedin.com/in/netexpert

05- MIkroTik PPPoE Configuration || Net Expert BD || Lesson 5 ||

PPPoE (Point-to-Point Protocol over Ethernet), a network protocol
for encapsulating Point-to-Point Protocol (PPP) frames inside Ethernet frames. That means PPPoE is essentially a Hulked-out version of the old PPP protocol. The main improvement it brought is the fact that PPPoE allows a single server connection to be divided between multiple clients, using Ethernet. Point-to-point Protocol (PPP) is used for communications between two nodes, such as between a client and a server. PPPoE is a commonly used application in the deployment of digital subscriber lines (DSLs). The PPP over Ethernet Client feature expands PPPoE functionality by providing support for PPPoE on the client and the server.

Video Details:

In this video, I will share with you how to configure PPPOE server in a MikroTik. How to set internet using through PPPOE user name and password.

👉Facebook Group: https://www.facebook.com/groups/13053...
👉page https://www.facebook.com/search/top?q...
👉Whatsapp: +8801729201335
👉Web: https://netexpertbd.com
👉linkedin: https://www.linkedin.com/in/netexpert