Nifty CNC Machining

It's been a while since I machined a points cover. These are a replacement for the standard Harley Davidson shovelhead and evo nose cone. I've done twin cams as well. I've done alot of different ones but not kept records of quantities, only the pics and CNC programs to repeat them as required. These are for a group of guys that build, repair, ride and hunt down the parts they lose along the way. My buffing skills are still as poor as ever, everyone knows I hate polishing. It's to give the new owner something to do. 😁

Just a small fill-in rush job. These #4140 high tensile steel guide pins are for locating a press stamping die for sheet steel. They had worn with use and then due to misalignment, 1 had sheared off. Diameter 20.005mm x 115mm long with a 24.4mm x 6mm head. They possibly should be hardened and ground, but the customer needed them overnight, so this will keep them producing until they can be done properly.