Motorcorp Solutions

The proof is in the pudding!! (or this case the 3in exhaust)

Our long time customer brought his RD7 CRV in needing some work carried out in preperation for some big breathing mods early next year and one of the area's that needed attending to was the broken flex joint in the current 2.5in exhaust, and after a quick chat with the client, we got PJZ Customs to fab up a new header back system for us (pictures will be in a seperate post).

Upon receiving the CRV back, we bolted the old girl onto the hub dyno and went through the tune to suit the new exhaust. Final peak numbers of 152kw / 224.1nm (6.1kw / 7.2nm peak gains) on 98RON prove once again that the good old peoples engine love a 3in exhaust. We were also able to increase the limiter to 8500rpm (as on the previous 2.5in we had power fall over quite hard after 7600rpm) which gave us a 2500rpm window from 6000rpm to redline where power was 138kw and over!

We have also picked 3 different points over the rpm range in the 2nd, 3rd & 4th pictures to show the biggest gains, as peak numbers don't show everything.

Picture 2 - 4.7kw / 12.8nm gain @ 3410rpm
Picture 3 - 5.7km / 12.4nm gain @ 5500rpm
Picture 4 - 11kw / 12nm gain @ 7480rpm

Smoother power & torque delivery makes the car easier to drive, while still being an absolute sleeper!

Does your car need tuning? Shoot us a DM, email [email protected] or reach out to us via our website https://motorcorpsolutions.com.au/dyno-tuning/