Precision Performance and Mechanical

Had Hayden’s f6 in for its latest round of mods before it goes built motor, carried out Haltech Barra Plug n Play, 8 button keypad, 1650s, AES Racing Mufflers dump valve, assorted syltech pressure sensors for the Haltech and a custom dyno tune leaving with nearly 520rwkw on a stock bottom end at 25psi on its highest boost setting.

Hey guys, here’s one we finished up today.

We’ve carried out the mods on this over the years and this customer asked what the next step was. After installing a twin pump surge tank, regulator and rail we’ve retuned this one on e85 using the PCMTEC multitune software - rolling antilag, high boost, low boost l, valet and ghost cams and a zf calibration utilising torque reduction strategies.

We’ve had a few tuning slots open up between now and the end of the month.

If you’re looking at tuning your vehicle, repairing or even servicing your vehicle please message us now and see what we can offer.

🔥🔥🔥Share it around🔥🔥🔥

It is that time again.

Chasing a qualified mechanic, performance industry experience is highly regarded especially barra/ls. Come build cool stuff with us. Good money for the right candidate.

Call us on 0411216382 during business hours or email us your resume to [email protected]

Thanks

Here’s another one we finished up a few weeks ago Adam’s fgx xr6 turbo.

In house entry level built motor with Spool Imports forged pistons and h beam rods (we rate this combo at 800hp but some rate it higher I prefer to under promise and over deliver)
in house built diff
In house Trans cooler wired to the haltech
Fab completed in house
Pulsar Turbo Australia g40 1150
Competition Coatings on the burnt bronze hotside
plazmaman.com on the intercooler, plenum and twin pump surge
Haltech plug and play and ic7 plus the usual sensors required fo saftey wired in
Base and engine run in completed on my roller and then sent up to Jamie Forced Performance & Tuning to put the finishing touches on with the hub.

All round a pretty cool fgx hope he gets heaps
of fun out of it.

If you’d like us to carry out work on your vehicle send us a pm, big, small, servicing or repairs we literally do it all.

🏠 Unit 2 Number 53 Tradelink road Hillcrest 4118
📞 0411 216 382
📧[email protected]

Fitted up these Boyd Bristol’s in the new full polished finish with a set of the new DBA 6 piston big brake conversion to suit fg.

We can supply and fit the boyd Bristol line of wheels and tyres to suit your falcon - generally have radials and wheels on the shelf ready to go. Currently running a special on the dba big brake kit at 10% off, so get onto that before it’s gone.

‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️‼️

Hey everyone after not taking bookings and knuckling down on a few bigger jobs/builds over the last few months that are finally complete we are back on top of our workload

If you’re thinking of getting anything done large or small shoot us a message we have a rare opportunity with heaps of availability right now. Dont wait around we are aure to book out fast.

Share it round and keep the boys cranking.

Hi everyone just a quick announcement - we won’t be available tomorrow (Monday 19th) for walk ins or phone calls please email or send us a message here and they will be responded to on Tuesday thank you for your understanding 🙏