Garage.Emperor

We've been running a printed filter to MAF adapter on our s13 FOREVER, so now that we're making the switch over to n62 MAF it's the perfect time to whip up a new one. Uses (4) m6x1.0 slim nuts pressed into a designated hex bore with the appropriate hardware, 3in outlet. Going to mess with inlet geometry some more once the new filter arrives ✌🏻
•⁠
•⁠
•⁠

Channeled my inner today and finally made holes in my dash for the 60mm advance defi's I've been hoarding. If anyone is interested in butchering their dash, the next couple of pics show what I used to make the holes and my measurements. I used a 2-3/8" hole saw, dimensions in the picture. S13 dash measured 325mm from edge of right vent to edge of center vent. I spaced the gauges out 10mm from each other, you can use my dimensions as reference for your own project (65mm is the O.D of the metal ring on the defi's I used). I lined up the bottom of the gauges to align with the bottom edges of the vents, some people like to go straight from the center of the right vent (not lining up with the center vent). Personal preference. Hope this helps! If you have any questions, don't hesitate to reach out. ✌🏻

Also, if there is any interest in a horn button run, lmk. We would love to make a run of those for you!
•⁠
•⁠
•⁠

Black Friday sale will be up later this week! It'll be live Friday until end of day Monday! Keep an eye out for updates on the specific times and discount code. ✌🏻 ⠀⠀⠀⠀⠀⠀⠀⠀⠀
•⠀⠀⠀⠀⠀⠀⠀⠀⠀
•⠀⠀⠀⠀⠀⠀⠀⠀⠀
•⠀⠀⠀⠀⠀⠀⠀⠀⠀
•⠀⠀⠀⠀⠀⠀⠀⠀⠀
•⠀⠀⠀⠀⠀⠀⠀⠀⠀
•⠀⠀⠀⠀⠀⠀⠀⠀⠀