Rebel Customs LLC

We got this new 589 setup for our friends over at . This truck got a set of smooth single hump fenders with our HD fender brackets. An in house made smooth style deckplate. Our friends over at helped us out with making the airline box and stainless side panels. We then installed plenty of lighting to make sure they are seen rolling down the road. Couple@more parts to come for this one! A visor was paint match and installed as well as some window chops. We removed the fuel tanks and had them painted as well. Thank you for the continued support it’s always a pleasure working with you guys! #589

brought us one of their new trucks to add some lighting. We added a pair of work lights that also come on with reverse, a purple spot light to be able to see the salt when spreading. Installed 4 strobes on the step brackets, 2 behind the grill and also changed the plow guides out to a set of lit guides. Thank you for the support we will see you on the next truck!

.i.p._landscaping brought us their new tag trailer for some extra lights to be added down the sides. While we were at it all the lights got changed over to dual revolution lights so they change to green with the truck. We also added a pair of strobes to make sure they are seen while out on the job. Thank you Brett for your continued support!

Merry Christmas!!!

This returning customer brought his truck by over the weekend for us to add 2 corner bumper lights and 2 blue lights facing down, as well as change out the mirror lights to match the rest of the truck. #389

.co brought us their kenworth for a few add ons. We changed out the stock visor to a one, and we also installed a set of mirror stainless cab and sleeper trim.

.leblancandsons_inc brought their truck by to have the body lights replaced and rewired, we did some dual revolution lights in the body, added a couple of work lights to light up next to the truck and also put 4 strobes hidden behind the grill. Thank you guys for the support we look forward to the next project!

Phase 2 is complete for this new flat glass w9. We removed the sleeper and did a “big hole” conversion to gain the driver some more leg room. Added a handful of glass ungerglow lighting and to top it off not pictured is a bunk heater so the customer can stay warm while not running the truck. Thank you for the continued support!

Smoothed a set of headlights for a customers peterbilt project. Last picture is the before. #359 #379 #389

Wet system install from the previous truck post.

We got this new 589 for set up with a 60” strobe light bar, we swappers out the cab lights for glass watermelons, a 14” mirror stainless visor, a set of mirror stainless breather lights front and rear with glass watermelons, a wet system setup to run a low bed, custom made smooth deckplate, we changed out the sleeper lights and added 2 more, installed a set of step toolboxes with custom made mounts, mirror stainless full fenders with our heavy duty hidden fender brackets, and to finish it off a mirror stainless taillight panel. Thank you for the business see you guys on the next one! #589

This truck came to us last week to have the existing fender brackets replaced because they kept breaking on the customer. So they asked us to make some stainless mounts and we did just that. Saving their old fenders and getting them back on the road quick! Thank you for the continued business! #567