Flash Mobile Diagnostics & Programming inc.

2000 Toyota 4 Runner:
Customer Replaced Ignition Switch with 2 New OEM Keys and only had 1 Valet key available Programming of these older Toyotas Requires a Master Key to add additional Keys so this job quickly became a job for the Bench.

Easy work when you have 20+ years of Electronics repair Experience!
Have a late 90’s early 2000’s Toyota and need this service?
Lost all your keys and the dealer told you that you would need a New ECM and 2 New Keys?
Flash Mobile Diagnostics & Programming Inc. Can Help!

Another New OEM Tool added to the Flash MDP Lineup. Volvo VOE Ethernet adapter late model 2016 and newer Volvos.

New toys to add to my rolling diagnostic & Programming toolbox.

2006 Nissan Sentra 2.5L
Vehicle was towed into a customers shop as a
Crank no start, fault DTC for cam sensor circuit.
Shop replaced Cam sensor and pigtail with a new OEM sensor.

Shop stated the vehicle would crank and not start unless they pulled the cam sensor out of the engine and then it would run ok even after the cam sensor was reinstalled, and the only fault that would return was for the Cam Sensor Circuit. I noticed non OE silicone on the front timing cover and a little blue edge of the new Cylinder head gasket, I set the engine to TDC via the crank pulley markings and pulled the Valve cover to inspect the cam lobe phasing, which appeared to be out of time so I pulled the upper front timing cover access off which verified that the timing was indeed off 1-1/2 links.

Advised the customer to remove the front timing cover and correct the cam timing.
Customer reported back all faults gone and vehicle starts as it should. Another happy customer!!!