Spare-Time Hobbies

Here's a new product for the Axial Gilamon. Now you can customize your look with a set of body panels that have a bit of style to them! As always, you can get them from use or do-it-yourself!

DIY - https://sth.ecwid.com/products/STL-DIY-3DP-AXP8-Axial-Gilamon-Body-Panels-p772646299

Buy - https://rcaddict.com/products/axp8-axial-gilamon-body-panels?_pos=1&_psq=gilamon+body&_ss=e&_v=1.0

AXP8 Axial Gilamon Body Panels Product Features Everest Gen7 PRO 1/10 Scale Off-Road Scale TruckPowder Coated 3mm Steel Ladder FrameAdjustable Wheelbase 317-325mmHobbywing Brushed Waterproof ESCLicensed Interco Super Swamper TiresReal Beadlock Wheels2.4GHz Radio SystemBattery & Charger IncludedMore Details BelowSpecifications Mot...

Finally the V1B - "Pajaro" Variant is ready for the UTB18 Swap. If you already have the chassis, all you need is the printed parts kit or the DIY print files.

I have not test fit the Bushido 12 yet. That should be done next week. I need to validate the Skid doesn't need adjusted to accommodate the slightly different Wheel Base from the Bu**er.

Files come free with chassis purchase and printed parts purchase. Alternatively, you can purchase the files and DIY the parts if you like.

Parts Kit - https://rcaddict.com/products/v1b-pajero-plastic-parts-kit-utb18-or-bushido12?variant=52069167628598

Chassis - https://rcaddict.com/products/v1b-bugger-chassis-kit-utb18?_pos=1&_sid=2dcd509a2&_ss=r

V1B: "Pajero" Plastic Parts Kit (UTB18 or Bushido12) v1 This is for plastic parts set only. Don't forget to order your chassis Rails Note: The Bu**er Chassis Works for both the Pajero Build and the Bu**er Build. This kit is designed to work with the Tamiya Hard body Pajero Metaltop TAM9335500 * The best place to source this body is currently on e-bay. **...

Our SCX6 RC Speedy Moon Buggy Build needed a way to mount these smaller large scale servos. Here you have it! It’s a simple bracket to get that stock or stock size servo mounted up while you save you money for a proper size servo!

Axial SCX6: RC Speedy Moon Buggy CMS Stock Servo Spacer This is a simple kit that allows you to mount your stock or stock sized servo on the front or rear CMS of your RC Speedy Moon buggy for your SCX6. What you get: 1 - Spacer Bracket What You Need:4 - m4x16 BHS, 2 - m4x20 BHS, 6 - M4 Nylock

Here's the newest Spare-Time Hobbies design. We have put together a Toe and Camber Setup Station for 8th Scale Race buggies!

Get it here: https://rcaddict.com/products/1-8th-scale-toe-and-camber-setup-station?_pos=3&_sid=3a5da0d8a&_ss=r

Print your Own: https://sth.ecwid.com/products/STL-DIY-3DP-1-8th-Scale-Toe-and-Camber-Setup-Station-v1-p743864531

1/8th Scale - Toe and Camber Setup Station v1 These were designed around a 1/8th Scale E-Buggy. The disks are set up for the 17mm Hex and Nut that is typically found on an 1/8th Scale E-Buggy. What you get:(2) - Front Disks(2) - Rear Disks(1 ea) - 0, 1, 2, 3 Degree Measuring Wedge. First set Zero Camber then Zero Toe (Measure the distance from....