Scuba Service Tools

Hollis 6-pin environmental seal cap socket

This 6-pin 3/8"socket is used to open and close the environmental seal cap on the Hollis first stage.

https://www.scubaservicetools.com/product-page/hollis-6-pin-environmental-seal-cap-socket?currency=EUR

Apeks seal cap socket for MTX-R and DB-4

The Environmental seal cap socket for the Apeks MTX-R and DB4 first-stage is used to remove and install the environmental seal cap (Apeks part # AP2010) on top of the Apeks MTX-R and the Apeks DB-4 first stage.

The tool incorporates a 1/2" Ratchet drive so it can be removed and closed with a torque or a socket wrench.

https://www.scubaservicetools.com/product-page/apeks-environmental-seal-cap-socket-for-mtx-r-and-db-4

Poseidon Jetstream and Xstream leak testing tool

The Poseidon Jetstream and Xstream leak testing tool enables an LP valve housing assembly to be easily pressurised and checked for leaks in a water bath outside the regulator body.

https://www.scubaservicetools.com/product-page/poseidon-jetstream-and-xstream-leak-testing-tool?currency=

Apeks drysuit tool-set

This Apeks drysuit tools set consists of a collection of all Apeks drysuit tools needed to service the dump valve and the front and back of your drysuit inflator.

https://www.scubaservicetools.com/product-page/apeks-drysuit-tools-set?currency=

Scuba test bench - Resort version with big IP gauge

This scuba test bench with big IP gauge, lives up to its name, it does not require a connected air source and can therefore be used anywhere for the regulator service.



https://www.scubaservicetools.com/product-page/scuba-test-bench-resort-version-with-big-ip-gauge